Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
In order to use a hitch-mounted bike rack like the Swagman Original #S64152-2 that you were looking at while towing a vehicle, you will just need to add the Roadmaster Dual Hitch Receiver Adapter #RM-077-4. This adapter will slide into the 2 inch…
view full answer...There are indeed hitches available. I'd recommend either the Curt #C11416 that you'd looked at or the EcoHitch #306-X7322. If I had to choose between the two, I'd personally go with the EcoHitch because it uses the more common 2 inch…
view full answer...I do have an option for you but there are not any class III, 2" trailer hitches for a 2016 Honda Civic. There are only class 1, 1-1/4" options like the Curt Trailer Hitch Receiver part #C11604 which is what I recommend using. That said, you…
view full answer...The Roadmaster Quiet hitch would be a great choice. You might actually need two of the Roadmaster Quiet Hitch Anti-Rattle Devices. You'll need part #RM-061-125 for the connection between your adapter and the receiver hitch, and the Quiet Hitch…
view full answer...I do have an option for you but there are unfortunately only class I, 1-1/4" trailer hitch options for a 2019 Volkswagen Jetta which is the case for a lot of these smaller sedans since they are not designed for heavy duty pulling or hauling. I…
view full answer...When we installed the EcoHItch part #306-X7273 on a 2015 Honda Fit just like yours we found that from the ground to the bottom of the hitch opening measured right at 10 inches.
view full answer...The Curt trailer hitch balls are all made in China. Many trailer hitch receivers too are made outside the U.S. but Curt does manufacture their hitches stateside. The 2-5/16-inch hitch ball you referenced, Curt #C40030, has a 15K gross trailer weight…
view full answer...While the Curt Wall Mount for 2" Hitch Accessories #C97DR is rated for 350 lbs, I don't see loading bikes on the bike rack for storage as a great idea since the bikes will be sitting further out and placing more stress on the wall mount - my…
view full answer...You should have 5-1/2 inches of clearance between the top of the Cargo Carrier part #e98991 and the bottom of your rear cargo door. Looks like you have right at 8-1/4 inches from the top of your hitch opening to the bottom of your rear door. This…
view full answer...An aluminum cargo carrier that should fit your 2019 Jeep Wrangler well is the 19x60 Curt Cargo Carrier for 2" Hitches - Aluminum 500 lbs #C18100. This measures 10-3/4" from the hitch pin hole to the nearest part of the rack, and measures…
view full answer...The main difference between the RoadActive Suspension #RAS54FR and #RAS4611, will be the weight capacities. Both of these will install and function the exact same way, but the #RAS54FR will have a maximum capacity of 3,000 pounds and should be used…
view full answer...You'll have to experiment with the settings of the #RAS4611 to find what works best to level your trailer. I can't give you an exact setting to use but I would try increasing the settings until you reach the desired level of reduced sag.
view full answer...Related Searches
Filter Your Search
Contact and Help