Search: 2 inch hitch cover   >  

There is very little actual difference between the two trailer hitch receivers that fit your 2022 Chevy Equinox (non-diesel model), which are the following part numbers: - Draw-Tite Max-Frame Trailer Hitch Receiver #76419 - etrailer Trailer Hitch…

We have hitches for the 2019 Chevrolet Equinox but the #36408 Draw -Tite is not a fit because there's a generation change after 2017. Instead, if you want to keep a 1-1/4 inch receiver the only option is part #36642 If you'd rather…

The easiest way to determine the correct replacement parts for your trailer's suspension is by simply measuring its existing components. Looking at one of your current equalizers, you will want to measure from the center of the front hole to…

The best hitch for a 2024 Hyundai Tucson is the etrailer Hitch item #e38KR. This hitch is custom fit and bolts to your Tucson with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525 lbs…

There are indeed hitches available. I'd recommend either the Curt #C11416 that you'd looked at or the EcoHitch #306-X7322. If I had to choose between the two, I'd personally go with the EcoHitch because it uses the more common 2 inch…

I checked with Curt and the etrailer Trailer Hitch Receiver part #e38KR is a fit for a 2023 Kia Sportage AWD Hybrid. There are no further modifications needed for this sub-model, it features a bolt-on no drill or cutting installation. Please note, if…

When we installed the Curt hitch #C13206 on a 2017 Subaru Outback Wagon we found that from the center of our hitch pin hole to the outer most edge of our bumper was right at 2-1/4 inch.

On the Curt hitch part #C13206 the distance from the center of the hitch pin hole to the furthest point out on the bumper will be right at 2-1/2 inches. On the Draw Tite Hitch #75673 the distance from the center of the hitch pin hole to the furthest…

You can take a quick measurement to make sure you have the clearance at the rear of your Outback. You will need a tape measure and a straight edge like a yardstick or a dowel. Place the straight edge vertically against the back of the bumper or spare…

When we installed the Draw-Tite part #75673 on a 2016 Subaru Outback Wagon like yours we found that it measure 5-1/2 inches from the center of it's hitch pin hole to the outer most portion of the bumper. The difference between this and the #75560…

From a visibility point of view the Draw Tite hitch part #75673 will be your best option for your 2017 Subaru Outback Wagon. This hitch is also better priced. They both sit very close to the same distance from the ground. The Curt #C13206 is 15-1/4…

As far as the Draw-Tite - 2" #75673 and the etrailer Hitch - 2" #e98847, these two hitches are almost identical in every way when installed on your 2018 Subaru Outback. They both provide you with 600 pounds of maximum tongue weight capacity…