Result: 2 inch ball 125 shank

The Trailer Hitch Receiver Lock for 3" Hitches #BW23FR has a 5/8" diameter so it can be used for 2", 2-1/2", and 3" trailer hitch receivers. The 3-1/8" span makes it fit with up to 3" hitches though, which is why we…

To determine the correctly rated system for your trailer, you need its loaded and ready to tow tongue weight. Then add that to the amount of weight stored in the back of your Yukon behind the real axle. Any weight behind the rear axle effects a…

The Reese dual-cam sway control is the superior sway control compared to that used in the Curt TruTrack systems. The Reese systems cams attached at the trailer will be more effective that the Curt system that gets its sway control primarily at the…

With an as-loaded weight of about 5200 lbs, your tongue weight will be somewhere in the 500-800 lb range. Because it's a travel trailer, you'll certainly want to go with a w/d system with an integrated sway control because a travel trailer is…

I spoke with my contact at Curt who said that you can actually install the brackets from the TruTrack #C17500 4" - 7" from the end of the bar. What you are wanting to do is perfectly fine.

The #C17499 and #C17500 use different heads as well as spring bars. In addition to the #C17507 replacement head you will need the #C17536 spring bars. The brackets and other parts do not need to be swapped out. This will give you a tongue weight…

Yes, the Gen-Y Torsion Weight Distribution Shank #GY54FR can be mounted in either orientation to provide more rise or drop. It will have a gauge on both sides of the hitch so that you can uses in either orientation and clearly see the gauge. Your…

You want to go with the coupler height that will allow your trailer to sit as level as possible. You accomplish this by having the trailer out on level ground and then use the jack to raise/lower the nose of the trailer so that it sits as level as…

Pretty much the only weight distribution systems that do not allow backing up while turning are the ones that have the bar style friction sway control pieces and with those you only would have to disengage the sway control bar and not the spring…

The Curt TruTrack Weight Distribution System part #C17500 which is rated for up to 10,000 lbs gross trailer weight and 1,000 lbs tongue weight would work but it wouldn't perform as well as the Curt TruTrack Weight Distribution System part #C17499…

To tow a heavy concession stand trailer with your 2019 Ford F-250 Super Duty you're going to want the Draw-Tite Ultra Frame Trailer Hitch Receiver item #41931. This hitch is custom fit and bolts directly to your F-250's frame with included…

Here are the parts I recommend to help get you setup for towing with the B&W Heavy-Duty Ball Mount #BWBMHD30212: - 2-5/16" Hitch Ball #BWHB94050 - etrailer Hitch Receiver Lock #e98881 - Roadmaster Quiet Hitch #RM-062 The hitch ball has a…