Select Vehicle:change vehicle

 2 Wire Plug   x   >  

Filter Results

Black Bracket with 2-Wire Plug for MC65 Series Clearance Lights

Our Price: $1.83


  (8)
Features: Molded, all weather plastic surface mount bracket Includes both lead and ground wires for mounting to all surfaces Quantity: 1 bracket A68PB Optronics Black Bracket with 2-Wire Plug

 Trailer Lights

 Mounting Brackets

 Mount Parts

 Optronics

 Black

 Value

Sealed, LED Mini Utility Light, Plug-N-Go, 2 Wire, 2 Diode - Clear

Our Price: $11.99


  (2)
2-1/2" L x 1-1/16" W x 11/16" D; sealed; waterproof; surface mount; "Plug-n-go", 180 molded plug; 2 clear LEDs; clear lens "Plug-n-go", 180 molded plug Ensures easy, watertight connection to electrical harness 2 Clear LEDs (Light Emitting Diodes) 2-1/2" Long x 1-1/16" wide x 11/16" deep LED light draws 0.046 amps

 Utility Lights

 Rectangle

 White

 Surface Mount

 2-1/2L x 1W Inch

 Optronics

 Value

Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit

Our Price: $128.20


  (14)
Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. to prevent corrosion Center pin on 6-Way plug wired to 12V power, there are two industry standards Includes: 4 Hy-Power diodes; 30' long, 4-wire harness; wire connectors; cable ties; 1 ring terminal;

 Diode Kit

 Splices into Vehicle Wiring

 Roadmaster

 Universal

 Tail Light Mount

RoadMaster 4-Wire Connector - Trailer End

Our Price: $5.09


  (6)
Create your own cord or replace the damaged ends on your RoadMaster 4-wire straight and Flexo-Coil electrical cords with this 4-pole, female connector. Features: Replaces lost or damaged 4-pole, round trailer-end connectors Fits RoadMaster 4-wire straight and Flexo-Coil electrical cords 910030-2 RoadMaster 4-Way Round, Trailer-End Connector

 Trailer Connectors

 Trailer End Connector

 4 Round

 Roadmaster

 Economy

Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 10" Lead

Our Price: $1.71


  (24)
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics backup and utility lights Right-angle design of plug allows

 Trailer Lights

 Plugs and Pigtails

 Wiring

 Optronics

 Two Wire Pigtail

 6 Inch Long

 Value

Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit

Our Price: $128.20


  (4)
Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes (RM-792) will be needed if you want to retain

 Diode Kit

 Splices into Vehicle Wiring

 Roadmaster

 Universal

 Tail Light Mount

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord

Our Price: $133.90


This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined be required if used with supplemental braking system Specs: Maximum amperage: 85 amps Maximum voltage: 24 volts Adapter cord length: 6-1/2' Wire gauge: 16 Wiring harness length: 30' Note:

 Diode Kit

 Splices into Vehicle Wiring

 Roadmaster

 Universal

 Tail Light Mount

7-Way Molded Trailer Wire Connector, 8' Long

Our Price: $29.71


  (430)
Trailer Connector RV Style 7-Way Blade with 8' lead Pre-wired 7-way trailer connector Measures 8 feet long including connector Wire gauges: 14 Gauge - red, brown, green, and yellow 12 Gauge -

 Trailer Connectors

 Trailer End Connector

 7 Blade

 Hopkins

 8 Feet Long

 Value

Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Our Price: $29.18


  (251)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required. ties, and terminal grease packet for electrical connections 90-Day limited warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in your rear

 Custom Fit

 Trailer Hitch Wiring

 Hopkins

 4 Flat

 No Converter

 Value

Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Our Price: $35.46


  (251)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required. ties, and terminal grease packet for electrical connections 90-Day limited warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind

 Custom Fit

 Trailer Hitch Wiring

 Hopkins

 4 Flat

 No Converter

 Economy

Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Our Price: $70.82


  (251)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system. light circuits. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system

 Custom Fit

 Trailer Hitch Wiring

 Hopkins

 4 Flat

 Powered Converter

 Premium

Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug

Our Price: $56.41


  (994)
Mount this 7-way, RV-style connector in your truck bed to simplify hookup of your 5th-wheel or gooseneck trailer. Harness plugs into existing wiring and retains use of factory 7-pole at the bumper. for installation Requires 2-1/8" hole in truck bed Specs: Harness length: 10' Wire gauges: Purple/green/yellow/brown: 16 Blue/red/white: 12 Distance between mounting holes center to center: 2-1/4"

 Custom Fit

 Fifth Wheel and Gooseneck Wiring

 Hopkins

 7 Blade

 10 Feet Long

 For Vehicle w Factory Tow Package

 Value

Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole - Ford, GM, Dodge, Nissan w/ Factory Plug

Our Price: $57.65


  (297)
This socket plugs into T-connector to provide a 7-pole trailer connector in the truck bed for use with fifth wheels. Connector plugs into OEM wiring harness to allow for a 7-pole connector Chevy, Dodge, GMC, Ford and Nissan trucks Current rating: 30 amps Volt rating: 12 volts Length: 7-1/2 feet Recommended hole cutout for connector in bed: 2-1/8" 1-Year limited warranty 11-893 11-932

 Custom Fit

 Fifth Wheel and Gooseneck Wiring

 Pollak

 7 Blade

 7-1/2 Feet Long

 Value

Hopkins Plug-In Simple Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector

Our Price: $28.95


  (251)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into OEM tow package wiring harness - no cutting or splicing required. and 7-pole adapters (sold separately) Connects quickly and easily - no cutting or splicing Locate connection point behind rear bumper Plug in connector Protective connection terminals resist corrosion Comes

 Custom Fit

 Trailer Hitch Wiring

 Hopkins

 4 Flat

 No Converter

 Economy

Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Our Price: $17.89


  (251)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required. ties, and terminal grease packet for electrical connections 90-Day limited warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in your rear

 Custom Fit

 Trailer Hitch Wiring

 Hopkins

 4 Flat

 No Converter

 Economy

Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors

Our Price: $21.99


  (258)
Quickly and easily install a 4-way and 7-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into OEM tow package wiring harness - no cutting or splicing terminals on one side and 4 on the other. If your vehicle has 2 terminals on one side and 5 on the other, you will need wiring harness HM11143395 instead. 43385 Plug-in Simple Hopkins Multi-Tow T-Connector

 Custom Fit

 Trailer Hitch Wiring

 Hopkins

 4 Flat

 7 Blade

 No Converter

 Economy

Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Connector

Our Price: $38.56


  (251)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required. is a battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits. Because most trailers run on a two-wire system

 Custom Fit

 Trailer Hitch Wiring

 Hopkins

 4 Flat

 Powered Converter

 Value

7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter

Our Price: $51.05


  (9)
This 7- and 4-pole connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system to 2003 and newer Chrysler and Dodge pickups and SUVs Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep Distance between mounting holes (center to center): 2-3/8" 1-Year

 Custom Fit

 Trailer Hitch Wiring

 Pollak

 4 Flat

 7 Blade

 No Converter

 Value

Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Our Price: $70.32


  (324)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system. no draw on your tail light circuits. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's

 Custom Fit

 Trailer Hitch Wiring

 Hopkins

 4 Flat

 Powered Converter

 Value

Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Our Price: $62.28


  (324)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required. that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one

 Custom Fit

 Trailer Hitch Wiring

 Hopkins

 4 Flat

 Converter

 Premium

Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Our Price: $23.15


  (324)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need

 Custom Fit

 Trailer Hitch Wiring

 Hopkins

 4 Flat

 Converter

 Value

Replacement Multi-Plug 7-Way and 4 Pole Trailer Connector

Our Price: $37.20


  (94)
Tow Ready replacement 7-way flat pin and 4-flat combo adapter harness for vehicles with a factory socket. for this harness to fit. Toyota and Lexus wired many of the models listed two different ways. You will want to match the wiring with the diagram on the 3-pin connector above. If your vehicle's wiring does

 Custom Fit

 Trailer Hitch Wiring

 Tekonsha

 4 Flat

 7 Blade

 No Converter

 Value

Plug-N-Tow (R) Wiring Harness with 4 Pole Trailer Connector

Our Price: $29.88


  (324)
Plug-N-Tow (R) Wiring Connectors provide a no-hassle, quick and easy way to wire your vehicle. connector includes dust cap Easy-to-follow instructions with pictures are included Converter load is a maximum of 2.1 amps per stop/turn signal (one turn signal on each side) 48" Long 4-pole loop

 Custom Fit

 Trailer Hitch Wiring

 Hopkins

 4 Flat

 Converter

 Economy

Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Our Price: $41.15


  (251)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required. 2 amps per circuit 90-Day limited warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in your rear cargo area on the driver's side. You

 Custom Fit

 Trailer Hitch Wiring

 Hopkins

 4 Flat

 Converter

 Value




< Previous    
1   2   3    . . . 76



<< Back To Results

^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.