Search: 185917   >   Accessories and Parts   >  

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

I think you are going in the right direction. I would definitely replace the 14 gauge wire going to the trailer brake magnets with 10 gauge wire or larger. Usually larger than 10 gauge is hard to get into the trailer connector though. I would also…

Setting up a brake controller is a little more feel than "set everything to X and Y for the best control" but there are definitely some pointers about how to figure out the best settings for your towing application. With the Reese Towpower…

For the 2008 Chevy Suburban I would recommend the Prodigy P2 brake controller, item #90885. The P2 is a newer version of the prodigy and has some features the Prodigy lacks, like troubleshooting diagnostics and compatibility with electric over…

The Tekonsha Prodigy P3 Trailer Brake Controller #90195 can be mounted anywhere on, in, or below your dash so long as it is horizontally level and parallel with the direction of travel. You will be able to use the Tekonsha Custom Wiring Adapter for…

The Curt Venturer Trailer Brake Controller #C74VV that you referenced can be installed in your 2013 Chevy Silverado. You are correct in that in order to install it in your truck you will need to remove the connector and hardwire the controller to the…

To determine if your 2007 GMC Sierra is the old or the new body style all you have to do is look at the back of the truck. If it is the old body style (Classic) then it will have amber turn signal lenses at the rear tail lights. New body style models…

If your trailer has 7 wires running all the way back to the brakes, then yes, you can tap into the existing wiring. Each of your new brakes will have two wires for the brake magnet. One wire is for 12 volt power to the brake magnets and the other…

A proportional brake controller like the Tekonsha Prodigy P2 Brake Controller, part #90885 applies power to the trailer brakes in proportion to the vehicles braking action. The setup of a proportional brake controller is a simple procedure. When the…

Fortunately, GM eliminated the need for the Wiring Adapter with the 2007 model year new body style trucks. The brake controller would attach directly to the existing tow package wires located under the dash. The tow package harness is located to the…

You will need to measure the diameter of the spindles where the seal and bearings ride. Check out the picture I attached that shows where this is. You will need an exact measurement so either a digital or dial caliper will be needed. To pick out the…

In order to verify the spindle dimensions so that you can pick out the correct hub/drum you have to get exact dimensions. For that you need to use a digital caliper like part #PTW80157. For how old your trailer is this is especially important as the…