Result: 1824200100

The recommended minimum clearance between gooseneck trailer overhang and truck bed rails is 4-6 inches. I'd recommend 6 inches but a lot of people get by with just 4. Ideally you have at least 6 inches of clearance and the trailer is sitting…

Yes, we have everything you need to convert the electric drum brakes on your 2014 Kaufman Car Wedge Trailer to electric over hydraulic disc brakes. In order to do this you are going to need disc brake assemblies, trailer hubs, brake lines, and an…

A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned you…

Based on my research, the 023-326-00 number you found at the back of your existing brake assemblies refers to the Dexter 12 inch x 2 inch electric brake assembly that is designed for 6,000 pound axles and features a 5 bolt mounting flange pattern. If…

There is one option that has the right dimensions to replace the Atwood 87891, which is a handle from Stromberg Carlson: - Replacement Crank Handle for Stromberg Carlson Landing Gear #LG-119226 The metal shaft where it attaches to the jack has an…

To flat tow your 2024 Chevy Equinox LT you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-523193-5. This baseplate will interfere with lower active air shutters so you may have to fully remove or trim…

I checked with Dexter and they indicate that for hub 008-386-80: "Available for service parts only." Meaning the actual hub assembly is not available but parts for it are such as the 35mm cartridge bearing #31-72-3. There isn't a way to…

In order to convert a Dexter 10K Axle (Made After May 2013) from electric drum to hydraulic disc brakes you'll need the following: Kodiak Disc Brake Kit part #K2R1058D11E (1 per Axle) Dexter Oil Hub for 9K to 10K General Duty Axles part…

For replacement Dexter manual adjust brake assemblies to replace your 36-19 you would want the part #23-27 for the right hand side and part #23-26 for the left hand side. These are manual adjust 10 by 2-1/4 inch Dexter brake assemblies that would…

The base or bezel used by the Bargman #47-84-527 Double LED tailllight is constructed of hard plastic, like the other rectangular lamps of this type. If you click the provided links, you can see a product demonstration and an install video. For…

Thanks for the info you listed. Based on that the correct replacement motor is the part #LC295380.

We have a very similar entry door lock with the Bauer Products Camper Door Lock #BA65FR. The configuration appears to be very similar to the lock on your 2004 Featherlight horse trailer. The Bauer lock is made to fit a cutout 5-1/4" wide x…