Search: 17132 > Accessories and Parts >
Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...I attached a chart that has all of the recommended lug nut torque specs for trailer wheels. Based on your studs being 1/2 inch, your wheels being 15 inches in diameter, and your lug nuts being coned you would want to torque your lug nuts to 90-120 ft…
view full answer...The best way to choose a weight distribution system is to select one that works with the tongue weight you have on the trailer you are towing. You will need to know the total tongue weight. Total tongue weight is the tongue weight of the trailer when…
view full answer...You want to go with the coupler height that will allow your trailer to sit as level as possible. You accomplish this by having the trailer out on level ground and then use the jack to raise/lower the nose of the trailer so that it sits as level as…
view full answer...Weight distribution systems are prone to making some odd noises, but a sound that would wake that dead is probably on the higher than normal side of things. The lift brackets of the Curt kit part #C17500 that you referenced can be greased and you can…
view full answer...The weight distribution head of the Curt #C17501 system is the only portion that should be lubricated, as shown in the provided diagram. The sway control feature of the hitch depends on the metal-on-metal friction of the spring bars against the…
view full answer...First, the 636 pounds of tongue weight is the dry tongue weight and will increase once the trailer is loaded and ready to tow. Since the dry weight is 6,200 pounds and the dry tongue weight is 636 pounds that means that the tongue weight is 10.25…
view full answer...I checked with Firestone and the part #F2615 does fit all models of the 2022 Ram 3500 including the models with the Cummins engine like you mentioned that would have the larger axle.
view full answer...The blank screen on your LCI Ground Control 3.0 could be either a power issue or a control module issue. I recommend first remove the panel and unplug it from the back leaving it unplugged for at least 15 minutes so that it loses all of the residual…
view full answer...We may have a grease seal that will work in your application however, my research had conflicting measurements for the Hadco 3122 that you referenced. I contacted my technical contact at Redline to verify that the Redline Grease Seal #1105-100-031…
view full answer...For your 2021 Mercedes Benz GLC300 the trailer wiring kit you'd want is the part #118747 which is custom fit for an easy install and has a very reliable converter box.
view full answer...Related Searches
Filter Your Search
Contact and Help