Search: 16570   >   5th Wheel Hitch   >  

Yes absolutely! The Replacement Head Unit for Curt A25 5th Wheel Trailer Hitch #C16580 will work great with the: -Curt R24 Round Tube Slider for Q24 5th Wheel Trailer Hitches #C16570. You will however be limited to the 24K capacity of the slider…

Yes, the Curt Q25 5th Wheel Hitch item #C16069 will fit in the factory puck system of a 2018 Chevy Silverado 2500. The base of this hitch will drop right down into the factory pucks. This hitch is recommended for trucks with the longer 8'…

In order to use a Mopar M25 5th Wheel Hitch which is the same as a Curt Q25 5th Wheel Hitch on a 2020 GMC Sierra 2500 you'll need new legs, the Curt OEM 5th Wheel Hitch Legs for Chevy/GMC Towing Prep Package part #CU53FR. Please note, there is…

Close, the Ram M25 is the same as the Curt Q25 hitch. If that's the style you're wanting then we have the Q25 in 2 different configurations depending on the bed length of your 2018 Ram 3500: 6-1/2' Bed Curt Q25 Slider - #C16566 Adapter…

The Curt Q25 5th Wheel Trailer Hitch for Ram Towing Prep Package #C16049 would fit in a 6-1/2' bed like your 2022 Ram 2500 has, but you're limiting the amount of turning clearance you have and run the risk of the nose of the 5th wheel coming…

Yes, the Curt Q25 5th Wheel Trailer Hitch part #C16566 will be an excellent option for a 2015 Chevrolet Silverado 2500 when used with the Curt Custom Fifth Wheel Installation Kit part #C16411-204 which is a drill free kit (frame only). This kit uses…

From what I could find out about your current circuit board, the Atwood Replacement Control Panel #AT91367 will be a direct replacement.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…