Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Scott you will need to get the width of your ramp as well as the weight of the ramp to pick out what you'd need. For example the part #M394FR is for 8 foot wide ramps and has a weight capacity of 185 lb. I attached a link to all of theā¦
view full answer...I wasn't able to find the exact dimensions on the W914-26LT so you'll want to remove it from the cutout and measure the cutout hole to confirm the correct fitment. Based on the item number you most likely have a 26" wide fireplace so weā¦
view full answer...Your Greystone WF2613R fireplace has actually been discontinued, and its replacement parts are no longer available, unfortunately. I know it's not what you're wanting to do, however since your fireplace and its parts are no longer available,ā¦
view full answer...Yes, the front of the Greystone 36" Electric Fireplace with Crystals #324-000081 is glass.
view full answer...We do have an option for a 36 inch RV fireplace, and what you can use is the following: - Greystone 36" Electric Fireplace #324-000081 You just need to ensure the correct fit, with this fireplace requiring a wall cutout measuring 34-1/4"ā¦
view full answer...I do have an option for you but we don't have a roof vent cover that would fit over the MaxxFan Deluxe Roof Vents like part #MA00-07500K since it already has one built-in. If you want to use a separate large roof vent cover like the MaxxAir II RVā¦
view full answer...When installing the MaxxFan Roof Vent w/ 12V Fan #MA00A04301K, there is not a required butyl tape width. You just need to ensure that the butyl tape covers the screw holes. The Alpha Systems Butyl Tape for RV Weatherproofing #AL33FJ is 3/4" wideā¦
view full answer...A bearing with a 0.75" inner diameter is LM11949 and a bearing with a 1.25" inner diameter is LM67048, and we don't have a hub with a 6 on 5-1/2" bolt pattern. For a hub with a LM11949 outer bearing and LM67048 inner bearing, theā¦
view full answer...The best option to replace your Tie Down Engineering Model LP80 actuator is the Dexter DX7.5 Drop-N-Go Brake Actuator item #099-175-20 you were looking at. This actuator has a 7,500 lbs capacity and is rated for disc brakes. It fits a 2" hitchā¦
view full answer...The Tie Down Engineering (TDE) Brake Actuator 48980 also known as the 80LP/85LP is a 8,000 lb or 8,500 lb disc brake actuator with 2" coupler. In order to replace this, the best option we have is the Demco Hydraulic Brake Actuator partā¦
view full answer...I spoke with Global Link and found that using the app to lock your Global Link RV Entry Door Locking Latch Kit #GL55VR will lock both the latch and keypad. The deadbolt locks with the latch on the same lock core and the other lock prevents the keypadā¦
view full answer...The Electric Jack #EJ-3527-BBX, and other jacks that operate from power supplied from the 7-way plug, rely on the ground and 12VDC contacts to deliver operating power requirements. Those contacts are located, respectively, at the 5:00 and 11:00ā¦
view full answer...Related Searches
Filter Your Search
Contact and Help