Result: 12cln

To go with the Aluminum HWT Series S5 Trailer Wheel #AM22318HWT you can use the chrome plated center cap #AM90113 that fits the 2.80 inch pilot hole. Then we have chrome lug nuts #12CLN as well. If you need a valve stem and want to keep the same look…

When it comes to replacing an aluminum wheel on your trailer there is a few things that you will need to find out to be certain what rim you need. We would need to know the bolt pattern and the diameter of the rim. I will attach a FAQ on how to…

The trailer tire size 215/75R14 that you have can fit on a 5.5 inch wide or 6 inch wide trailer wheel so either width will work fine. So the galvanized wheel part #AM20364 would fit and work well.

Thanks for the information on your trailer. For your axle with brakes I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 #AKHD-655-6-EZ-K if you have the spindles with the integrated grease…

I attached a picture that shows the pin out diagram for the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-11932 that you referenced.

A 19 mm socket would be needed to remove the DeeMaxx Lug Nut part #DE93GR.

Yes, the 60-Degree angle of the 1/2"-20 DeeMaxx Trailer Wheel Lug Nut #DE93GR is standard for the vast majority of trailer wheels out there. There are some 90-Degree cone shapes but these are typically for 5/8" and 9/16" wheel bolts so…

The Kodiak disc brake kit #K2R35DS is made up of Dacromet and stainless steel components. Dacromet has a 400 to 600 hour salt spray rating while stainless steel is about as corrosion resistant as you can get. Still when using these items in a salt…

Dexter Nev-R-Lube Bearings such as the 50MM #31-71-3 referenced in your question do not have a specific maintenance or replacement schedule. These are pre-lubricated at the factory, which will make it resistant to contamination, and sealed for life…

No, the etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10 Diameter - 5 on 4-1/2 Item #AKHD-545-35-EZ-K that you referenced comes as a single hub and drum assembly so you need to purchase 2 of them for each axle on your trailer.…

From the pictures you sent in it looks like the inner diameter of your Nev-R-Lube bearing is about 2" which means you'd need the 50MM Nev-R-Lube Bearing for 8,000-lb Dexter Axles #31-71-3. Aside from that you're basically just going to…

I checked with Dexter and they indicate that for hub 008-386-80: "Available for service parts only." Meaning the actual hub assembly is not available but parts for it are such as the 35mm cartridge bearing #31-72-3. There isn't a way to…