Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I recommend installing our etrailer Trailer Hitch Receiver #e98848 on your 2024 Honda CR-V Hybrid. I have included an installation video link at the bottom of the page which shows us installing this receiver on a 2024 CR-V hybrid in our shop so you…
view full answer...For your 2010 Ford Fusion we have the Draw Tite hitch part #24865 which is a confirmed fit and would work well for carrying your 1-1/4 inch hitch bike rack. I attached an install video for this hitch for you to check out as well.
view full answer...Although the T-One Vehicle Wiring Harness you mention obtains its signals from plugging inline with the existing tail light wiring harnesses, the voltage to power the trailer lights needs to be drawn directly from the battery. The reason for this is…
view full answer...Brophy mounting bracket #BK4F is designed to fit a standard 4-Way flat trailer connector so I don't see any reason why it wouldn't work with Hopkins wiring harness #HM43575.
view full answer...Yes, the 4-way connector of the part #C55411 that you referenced will work well with the 4-way mount part #BK4F that you also mentioned.
view full answer...Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…
view full answer...Are you sure that's the number you found? I can't find any references to it anywhere.
view full answer...The Draw-Tite Trailer Hitch Receiver #24897 that you referenced will work on your 2013 Ford Fusion Hybrid. You will need to either trim a fascia piece or have it removed all together to install this hitch. Check out the installation instructions I…
view full answer...The best way to determine which wires carry which tail light function is to use a circuit tester, like part #3808. You will want to have a friend help you. With the vehicle in park, emergency brake engaged and the keys in the power mode, have your…
view full answer...Ball mounts like the Curt #C45100 are available in various lengths. This one happens to be 13-inches long, longer than some. Longer ball mounts are needed, for example, in cases of a truck having a slide in camper in the bed, or when using a…
view full answer...You seem to have found the silver lining in that your 2014 Ford Fusion is well built! Look for a factory harness that goes from the cab of the vehicle through the firewall. You may have to look in some tight places. If you cannot locate a harness, or…
view full answer...The installation of a trailer wiring harness on your 2022 Honda Pilot may seem difficult but it is not as complicated as you would think. The first thing would be deciding on what wiring harness to use, I recommend the T-One Vehicle Wiring Harness…
view full answer...Filter Your Search
Contact and Help