Filter Results

Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise

Our Price: $59.64


  (73)
Features: Convert any 1-1/4" (Class I and II) receiver to a 2" receiver (not to be used for towing or with snow plows) Powder coated black finish Extends 7" and raises 5-1/2"

 Hitch Adapter

 Hitch Expander

 Fits 1-1/4 Inch Hitch

 1-1/4 Inch to 2 Inch

 Brophy

 7 Inch Long

 Steel

 Value

Hitch Extender For 1-1/4" Trailer Hitch Receiver 6"

Our Price: $48.97


  (51)
Extend your trailer hitch receiver opening so that you can clear your spare tire when using your hitch-mounted bike rack or so that your trailer won't hit a rear-mounted propane tank when you coated black finish Note: The limiting factor is the capacity of your hitch or vehicle, whichever has a lower capacity. Using a 1-1/4" extender will reduce your hitch's overall capacity by 50

 Hitch Adapter

 Hitch Extender

 Fits 1-1/4 Inch Hitch

 Brophy

 6 Inch Long

 1750 lbs GTW

 Steel

 Value

MaxxTow Dual Hitch Extender for 2" Trailer Hitches - 12" Long

Our Price: $58.95


  (93)
Extend your trailer hitch receiver opening and get an extra receiver with the same piece. This dual hitch extension gives you (2) 2" receivers so you can tow a trailer and use an accessory hitch receivers Hitch receiver sizes: 2" x 2" Distance from center of hitch pin hole to center of hitch pin hole: 12" Overall length: 17-1/4" Maximum weight capacity: 4,000 lbs Maximum

 Hitch Adapter

 Hitch Extender

 Fits 2 Inch Hitch

 MaxxTow

 12 Inch Long

 4000 lbs GTW

 Steel

 Value

MaxxTow Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" Hitch - 11" Long

Our Price: $17.06


  (53)
Adapter lets you use your 2" hitch-mounted accessories with your 1-1/4" x 1-1/4" (Class II only) trailer hitch receiver. Sturdy steel is powder coated for corrosion resistance. Hitch Features: Hitch adapter turns your 1-1/4" trailer hitch receiver into a 2" receiver so that you can mount a bike rack, cargo carrier or other 2" hitch accessory Sturdy steel

 Hitch Adapter

 Hitch Expander

 Fits 1-1/4 Inch Hitch

 1-1/4 Inch to 2 Inch

 MaxxTow

 6-1/2 Inch Long

 Steel

 Economy

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Our Price: $124.51


  (2)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry 1-1/4" x 1-1/4" Rating: Class II Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 300 lbs Limited lifetime warranty Draw-Tite Tested Tough Draw-Tite's Tested Tough program provides

 Draw-Tite

 Class II

 3500 lbs GTW

 300 lbs TW

 Visible Cross Tube

 Custom Fit Hitch

 Value

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Our Price: $125.73


  (1)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry 1-1/4" x 1-1/4" Rating: Class II Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 300 lbs Limited lifetime warranty Draw-Tite Tested Tough Draw-Tite's Tested Tough program provides

 Draw-Tite

 Class II

 3500 lbs GTW

 300 lbs TW

 Concealed Cross Tube

 Custom Fit Hitch

 Value

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Our Price: $116.41


  (9)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry 1-1/4" x 1-1/4" Rating: Class II Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 300 lbs Limited lifetime warranty Draw-Tite Tested Tough Draw-Tite's Tested Tough program provides

 Draw-Tite

 Class II

 3500 lbs GTW

 300 lbs TW

 Concealed Cross Tube

 Custom Fit Hitch

 Value

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Our Price: $110.00


  (4)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Drawbar sold separately - pin and clip included Made in the USA Specs: Receiver opening: 1-1/4" x 1-1/4" Rating: Class II Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 350 lbs

 Curt

 Class II

 3500 lbs GTW

 350 lbs TW

 Concealed Cross Tube

 Custom Fit Hitch

 Economy

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Our Price: $106.80


Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Drawbar sold separately - pin and clip included Made in the USA Specs: Receiver opening: 1-1/4" x 1-1/4" Rating: Class II Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 350 lbs

 Curt

 Class II

 3500 lbs GTW

 350 lbs TW

 Visible Cross Tube

 Custom Fit Hitch

 Value

Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" - 6" Long

Our Price: $27.00


  (10)
Transform your 1-1/4" trailer hitch receiver (Class II only) into a 2" one with this adapter from Curt. It slides into your existing hitch receiver so you can easily carry a 2" bike Features: Hitch adapter turns your 1-1/4" Class II trailer hitch receiver into a 2" receiver so that you can mount a bike rack, cargo carrier or other 2" hitch accessory Extended

 Hitch Adapter

 Hitch Expander

 Fits 1-1/4 Inch Hitch

 1-1/4 Inch to 2 Inch

 Curt

 6 Inch Long

 Steel

 Economy

Hitch Extender For 1-1/4" Trailer Hitch Receiver 10"

Our Price: $58.42


  (28)
Features: Trailer hitch extender for 1-1/4" hitch receivers Prevents hitting trailer or propane tanks when making sharp turns while towing Extends hitch 10" from center to center of hitch

 Hitch Adapter

 Hitch Extender

 Fits 1-1/4 Inch Hitch

 Brophy

 10 Inch Long

 1750 lbs GTW

 Steel

 Value

Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs

Our Price: $48.04


  (107)
Carry accessories such as your bike rack or cargo carrier while also towing with this multipurpose ball mount. Receiver intended for accessories only. Do not exceed 750 lbs of total tongue weight. 5/8" Pin and clip included Specs: Application: 2" x 2" receiver hitches Gross trailer weight: 7,500 lbs Tongue weight: 750 lbs Drop: 2-1/4" from top of vehicle's 2" hitch opening

 Fixed Ball Mount

 Class III

 7500 lbs GTW

 Drop - 2 Inch

 Rise - None

 Curt

 No Ball

 Built-In Dual Hitch

 Steel Shank

 Value

Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs

Our Price: $25.93


  (74)
Sturdy steel ball mount with solid shank measures 14-1/4" from center of hitch pin hole to center of ball hole. CNC-machined for clean, straight lines. Powder coat gloss finish is corrosion hitch receivers Gross towing weight: 6,000 lbs Tongue weight: 600 lbs Length: 14-1/4" from center of hitch pin hole to center of ball hole Rise: 4" from top of inside of hitch opening Drop:

 Fixed Ball Mount

 Fixed Height

 Class III

 6000 lbs GTW

 Drop - 6 Inch

 Rise - 4 Inch

 6 Inch Drop

 Curt

 No Ball

 Long Shank

 Steel Shank

 Value

Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs

Our Price: $47.92


  (60)
Sturdy steel ball mount with a solid shank measures 13-1/4" from center of hitch pin hole to center of ball hole. Powder coat finish is corrosion resistant. Application: 2" x 2" trailer hitch receivers Gross towing weight: 10,000 lbs Tongue weight: 1,000 lbs Length: 13-1/4" from center of hitch pin hole to center of ball hole 7-1/2" From center

 Fixed Ball Mount

 Class IV

 10000 lbs GTW

 Drop - 2 Inch

 Rise - 1 Inch

 Brophy

 No Ball

 Long Shank

 Steel Shank

 Value

Trailer Valet 5X Swivel Jack and Trailer Mover - Topwind - 15" Lift - 500 lbs

Our Price: $340.00


  (237)
Heavy-duty jack with integrated drive function replaces your ordinary trailer jack and takes the hassle out of hooking up and moving your trailer. Simply turn the crank that powers the drive system and direct your trailer with the steering handle. Bracket height: 9" Retracted 24" Extended Dimensions: 28" tall x 18-1/2" wide x 12-1/2" long Tongue weight capacity: 500 lbs Weight: 45 lbs Gear ratios: High speed: 5-to-1 Low

 Trailer Dolly

 Side Frame Mount Jack

 Swivel Jack - Pull Pin

 Topwind Jack

 Trailer Valet

 Bolt-On

 With Wheel

 500 lbs Capacity

 500 lbs

 Premium

Yakima DoubleDown 4 Bike Rack - 1-1/4" and 2" Hitches - Tilting

Retail:$219.00

Our Price: $175.20

After Instant Rebate

  (120)
DoubleDown 4 is a safe bet for bike owners on a budget. This four-bike rack features a mast that tilts forward for access to rear cargo and arms that fold down for storage. Narrow arms fit a wide and 1-1/4" hitches Premium (TriggerFinger) release buttons Enable arms to fold down for storage Anti-sway (Standard SwitchBlade) cradles provide bike stability Secure bikes with soft rubber straps Eliminate

 Hanging Rack

 4 Bikes

 Tilt-Away Rack

 Fold-Up Rack

 Yakima

 Fits 1-1/4 Inch Hitch

 Fits 2 Inch Hitch

 Fits 1-1/4 and 2 Inch Hitch

 Locks Not Included

 Frame Mount

 Value

Kuat Transfer 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Wheel Mount - Tilting

Our Price: $289.00


  (82)
This platform-style rack lets you transport 2 bikes on the back of your vehicle. Ratcheting hooks hold your bikes by the wheels with no frame contact. A foot pedal lets you tilt rack with bikes loaded for cargo area access and fold it up for storage. hitch pin reduces movement and noise of the rack in your hitch Removable adapter sleeve lets you convert the rack for use in 1-1/4" hitch Optional lock set (PTSCLK12 - sold separately) secures bikes

 Platform Rack

 2 Bikes

 Tilt-Away Rack

 Fold-Up Rack

 Kuat

 Fits 1-1/4 Inch Hitch

 Fits 2 Inch Hitch

 Fits 1-1/4 and 2 Inch Hitch

 Locks Not Included

 Carbon Fiber Bikes

 Wheel Mount

 Economy

Erickson Big Bed Junior Load Extender for Truck Bed or Roof - 2" Hitches - 350 lbs

Our Price: $60.34


  (71)
The Big Bed Junior lets you safely and easily carry loads that extend past the bed of your truck or UTV. Use it as a bed extender, or use it as a high-mount load bar that lets you haul cargo above 350 lbs When used as bed extender: Extension from hitch receiver: 4' Height adjustment (in 1-3/4" increments): 17" to 24" When used as high-mount load bar: Extension from hitch

 Load Extender

 Kayak

 Canoe

 Fits 2 Inch Hitch

 2 Inch Hitch

 Fixed Carrier

 Hitch Mount Carrier

 Load Extenders

 Erickson

 Steel

 Class III

 Class IV

 Standard Duty

 Non-Locking

MaxxTow MaxxHaul Truck Bed and Roof Load Extender - 2" Hitches - 350 lbs

Our Price: $57.38


  (29)
Load extender lets you easily haul kayaks, construction materials, and other loads that extend past your truck bed or roof. Height can be adjusted from 15-3/4" from the top of the shank as a roof extender): Retracted: 55-1/8" from top of shank to top of load bar Extended: 63-1/4" from top of shank to top of load bar Hitch pin hole diameter: 5/8" Snapper pin diameter: 1/2"

 Load Extender

 Kayak

 Canoe

 Fits 2 Inch Hitch

 2 Inch Hitch

 Folding Carrier

 Hitch Mount Carrier

 Load Extenders

 MaxxTow

 Steel

 Class III

 Class IV

 Standard Duty

 Non-Locking

Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long

Our Price: $144.49


  (24)
This dual-function adapter bar lets you extend your hitch beyond your bed-mounted camper and reduce your hitch opening so that you can have a 2" hitch for towing a trailer or mounting Features: Adapter bar lets you modify your hitch receiver to accommodate your application Extends the length of your hitch receiver to clear obstacles like a truck-bed-mounted camper Reduces

 Hitch Adapter

 Hitch Extender

 Hitch Reducer

 Fits 2-1/2 Inch Hitch

 2-1/2 Inch to 2 Inch

 Curt

 24 - 34 Inch

 Steel

 Value

Kuat NV 2.0 2-Bike Platform Rack - 2" Hitches - Aluminum - Tilting - Gunmetal Gray

Our Price: $629.00


  (47)
This platform-style carrier holds 2 bikes by the wheels with adjustable hooks and sliding straps. The rack tilts down with bikes loaded for cargo area access and folds up for storage. Includes locks and a built-in repair stand. Fits 3/4" - 2-1/2" diameter tubing Adjusts for optimal bike positioning Hitch lock and retractable cable locks secure bikes to rack and rack to vehicle 2 Keys included Lightweight aluminum

 Platform Rack

 2 Bikes

 Tilt-Away Rack

 Fold-Up Rack

 Kuat

 Fits 2 Inch Hitch

 Bike and Hitch Lock

 Electric Bikes

 Carbon Fiber Bikes

 Heavy Bikes

 Wheel Mount

 Premium

Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs

Our Price: $590.00


  (75)
Hitch-mounted tow bar has stainless steel, telescoping arms that automatically lock into place. Its large hookup radius allows you to connect without perfectly lining up your vehicle. Easily folds up Arm length (as measured from center of hitch ball to center of quick-disconnect bar): Extended: 53" Retracted: 41-3/4" Weight capacity: 6,000 lbs 1-Year limited warranty Necessities for Flat

 Hitch Mount Style

 Telescoping

 Roadmaster

 Roadmaster EZ

 Roadmaster MX

 Roadmaster XL

 Roadmaster Standard

 Stores on RV

 Standard

 6000 lbs

 Steel

Husky Center Line Weight Distribution w/ Sway Control - Trunnion - 12,000 lbs GTW, 1,200 lbs TW

Our Price: $396.43


  (29)
2-5/16" Hitch ball and shank are included. A tightly torqued system head and chainless brackets that offer steel-on-steel friction work together to firmly hold your trailer in line with your tow includes: head assembly, chrome hitch ball, adjustable shank, spring bars, frame brackets, spring bar lift tool, and all necessary hardware Specs: Tongue weight: 800 lbs - 1,200 lbs Maximum gross towing

 WD With Sway Control

 900 lbs

 1000 lbs

 1100 lbs

 Husky

 Allows Backing Up

 Prevents Sway

 Electric Brake Compatible

 Surge Brake Compatible

 Includes Shank

 Heavy Duty

 Value

Thule Helium Aero 2 Bike Rack - 1-1/4" and 2" Hitches - Tilting - Aluminum

Retail:$379.95

Our Price: $303.96

After Instant Rebate

  (149)
This lightweight 2-bike hitch rack has RDT anti-sway cradles that cushion your bikes, and a built-in, anti-rattle hitch pin for tool-free installation. The rack tilts for cargo area access, bikes during transport Made in the USA Specs: Application: 1-1/4" x 1-1/4" (Class I and Class II) and 2" x 2" trailer hitch receivers Carrying capacity: 2 bikes Weight capacity: 35 lbs

 Hanging Rack

 2 Bikes

 Tilt-Away Rack

 Fold-Up Rack

 Thule

 Fits 1-1/4 Inch Hitch

 Fits 2 Inch Hitch

 Fits 1-1/4 and 2 Inch Hitch

 Bike and Hitch Lock

 Frame Mount

 Premium




< Previous    
1   2   3    . . . 17




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.