Nissan  x  >   Altima  x  >  

I have a question. Would my car be able to tow a Pontiac Vibe 2009 with the correct car dolly? What would be the maximum weight I can handle? Im thinking about getting a pull behind camper but need to know what I can get away with pulling weight...

Do we need tighteners for Titan Chain Cable Snow Tire Chains - Ladder Pattern - Steel Rollers - 1 Pair Item # TC1034 | While the Titan Chain Cable Snow Tire Chains # TC1034 'technically' don't need chain adjusters or separate tensioners, I...

Im wondering if I would be able to carry a 2021 Specialized como 4.0 step over E-BIke with the Yakima 2 bike holding rack on my 2021 Nissan Altima? You have the bike rack listed as Item # Y02634. The bike is 48 pounds, and your site says it...

Im looking for a bike rack for 3 bikes that is trunk mounted confirmed fit for a 2008 Nissan altima sedan with a spoiler. I will be using it for one woman and 2 mens bikes and I want to make sure theres plenty of room for all 3 bikes. Can you...

2020 Nissan Altima SR I do not have a hitch on my vehicle. Is this the only part I would need to be able to tow an uhaul trailer? | In order to tow your rental trailer, you'll need to install a trailer hitch like the Curt # C11352 and a trailer...

My passenger side wheel is loos at the bearing and the bearing grease cap is missing. What parts do I likely need to repair this? 1. How do I find the grease cap 21-3-AL-100? 2. How do I order the 4755 cotter pin? 3. 4754 Spindle Castle nut? 4....

Can I mount the Reese RP30047A head on the RP30048 slider assembly? Thanks, | Yes, we have confirmed that the Reese Fifth Wheel Hitch Head part # RP30047A is a fit for the Reese Slider Base Assembly part # RP30048 that you also referenced as...

Hi I would like to purchase a Malone MicroSport Trailer XT. You say that the hitch ball must be at 18 inch high. I cannot find anywhere a clear explanation of what does that mean. Top of the ball, center of the ball at 18. If it is not...

Good afternoon. Can you tell me what the difference is between the Glacier Cable Snow Tire Chains - 1 Pair and the Titan Chain Cable Snow Tire Chains - Ladder Pattern - Steel Rollers - 1 Pair? Will they both come backed by a warranty? Let me...

Hi, I had a wire harness for my equinox where I snapped it into the back tail lights and grounding wire into the steel near the light. That was it. I read where your harness needs to go back to the battery. Is there a similar harness for...

I am looking for a class II hitch for 2014 Nissan Altima, do you have one? | I have confirmed that the Curt Trailer Hitch Receiver I - 1-1/4" # C11352 is a good fit for your 2014 Nissan Altima. This is a Class 1 hitch; there are currently...

im looking for information about a hitch for my 2005 nissan altima | There are two trailer hitch options for a 2005 Nissan Altima, the Curt Trailer Hitch Receiver part # C11264 and the Draw-Tite Sportframe Trailer Hitch Receiver part # 24788....

Will the Firestone Coil Rite Air Helper Springs #F4105 stop my wheels from rubbing when I hit a dip in the road. | The Firestone Coil-Rite Air Helper Springs # F4105 that you referenced will give you additional support for the rear suspension...

I have a 2017 nissan altima that I was going to use your naked roof rack. I didnt know if you have to have a specific type of snow ski rack to be placed on top of this system? | Any standard ski rack would work well on the Sportrack roof rack...

Do you have a hitch for this car? | We do have a fit for your 2011 Nissan Altima sedan; I checked with the manufacturer and can confirm that the correct fit is the Curt Trailer Hitch Receiver # C11352. I have added a photo a customer sent in...

I need to know the length of the Drawbar I would need to attach a light trailer I bought for my kayaks. | We have a 3-3/4 inch rise that works great with your trailer, item # C45023 . It's the Curt Class I Drawbar - 3-3/4" Rise - 11-1/2" Long...

HI, i have 2 trek Marlin 5’s, both 17.5 inches and 29inch wheels. Will they both fit on this rack? I would like to order asap, just want to make sure they will fit. I bought a different rack elsewhere and both bikes wouldn’t fit without pedals...

i am trying select to a ball mount, euro style, for my Nissan Altima with 11352 Class I Hitch. By my measurements I require 5 to 6 inches to clear the bumper. No where on any sites have I found any reference to internal dimensions from the...

i need 2- hub/rotors 1 piece ,2- calipers, 2 brake hoses and brake pads my vin plate says 4400 gvrw and 2200 gawr. 14inch wheels 5 on 4 1/2 bolt circle | We do have one kit that may fit your 2200lb axle, but you will need to confirm which...

need luggage space for trip from OR to AR. What is our best option. no racks on it now and wont need them again | For a one time roof rack use application you are going to want to go with an economically priced option. But since you will be...

The hitch is not wide enough for my 2012 altima Nissan | The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24796 you purchased is a confirmed fit for your 2012 Nissan Altima. What more than likely happened is...

Re Curt # C18110 and Curt # C18145, for an Altima. Tonque weight is 200 LBS. What is the weight of these carriers, and do you subtract that from the tonque weight for total weight with cargo? Thanking you in advance | The tongue weight for...

I have a bike rack for my truck that has a 2inch hitch. I want to use this same bike rack for 2015 Nissan Altima. Can you recommend a 2inch hitch mount for a Nissan 2015 Altima so I can use this bike rack on my car as well? | I have a trailer...

Can you tell me what is the difference between the Primus IQ and the Prodigy P2. What I have to tow is a pop up tent 2500 pounds with a car. 2005 altima | There are quite a few differences. The ones you can see easily on the outside are the...