Hyundai  x  >   Santa  x  >  

Will the Curt #C34ER fit a 2022 Santa Fe? | The Curt cc # C34ER will indeed fit your 2022 Hyundai Santa Fe. This will need the spare tire to be lowered or removed temporarily for hitch installation and an underbody panel(s) and/or fascia must...

whats the difference between Yakima RidgeBack and the Yakima FullTilt. | Both the RidgeBack # Y02459 and FullTilt # Y02463 are high-end hanging-style racks from Yakima but in this case the FullTilt has a few extra features so I recommend going...

Can you point to final installed photos showing how much of the cross bar is visible? | The Curt Trailer Hitch Receiver part # C34ER which is a fit for a 2021 Hyundai Santa Fe does indeed have a hidden crosstube design. I have attached a photo...

I would like the recommended best hitch for the 2020 Hyundai Santa Fe, if you could? I'm going to be doing some towing of a camper, and also use it for bike racks. So what is the best hitch, and what wiring harness is right for the Santa Fe?...

What part numbers do I need ? | For your 2022 Hyundai Santa Fe the trailer hitch I recommend is the Curt Class III part # C34ER as it has the highest towing capacities and is mostly hidden as only hitch opening hangs below rear bumper for a...

I am trying to asses if I have the room atop my 2017 Santa FE SE 7 passenger / 3 row for two sets of these Y040704. I realize in part this depends on the kayaks, roof rack weight capacity 220lbs and of course the width of my factory cross...

I want to tow a trailer with my 2020 Santa Fe but I'm not sure what to get. What do you recommend? | The basics to tow a trailer include a trailer hitch, wiring for the trailer lights, and a ball mount kit (ball mount, hitch ball, and hitch...

Hi I am looking for a hitch bike rack platform style for my 2013 Hyundai Santa Fe Limited long wheel body. The hitch is slightly recessed into the bumper and you remove a plastic cap to expose the hitch. I am looking at the Swagman Quad 2+2...

do you have one for a 2019 Sante Fe Sport without a trailer towing pkg | Yes, the T-One Vehicle Wiring Harness part # 118784 is a fit for all models of the 2019 Hyundai Santa Fe which includes the Sport and those with or without the towing package....

I need a bigger ball that what comes with the BLU36FR. The camper requires a 2 5/16. Which one do I use for this weight distribution unit? Ill be ?towing a 21ft KZ sportsmen classic 181BH with a 2017 Santa Fe 6 Cyl. 370Lb tongue weight dry...

For your 2020 Hyundai Santa Fe we have a couple of wiring options. These will both offer a 4 way flat trailer connector. They are almost identical they install the same, have the same power output and are designed to protect your vehicle should...

Can you please recommend a roof rack for a 2015 Hyundai Santa Fe GLS w/ panoramic moonroof and flush rails? Need something that has plenty of clearance and wont scratch the glass and also wont make noise while driving. Thank you. | For your...

I have a 2017 Hyundai Santa fe with the v6 and duel exhaust What trailer hitch and wire harness would I need. It has the panel in the bumper to remove for the hitch. | The Curt Class III hitch part # C13153 is a fit for your 2017 Hyundai...

to whom it may concern, I am interested in buying the class III hitch part number C13153 for my 2017 Hyundai Santa Fe Limited ultimate. It is the three row seating model. I just want to confirm that this is the correct hitch for my SUV before...

hello, just had the towing package installed on the vehicle but no wires. Been looking at the vids on your site and removed the panel to expose the trailer connector with cover cap. Looks like a 4-way connector but trailer is 7-way and bracket...

I have a Kwikee 9551 step motor I need to replace, on a kwikee 32 series step. Do you have a replacement ? Thanks for your time | We have exactly the motor you are looking for. If your Kwikee 32 Series Steps were produced between 2000-2005...

I have a 2” hitch and would like to add a 7-8” extender so that I can open the vehicle hatch while bikes are loaded on my Thuke Apex 4 rack. I’m considering the Yakima Straight Shot and the Curt 8” extenders. The rack itself has an integrated...

Hello, Im looking to set-up my 2022 Hyundai Santa Fe for towing but before I purchase anything Id like confirmation that what Im buying will be the proper equipment. As for the hitch part #C34ER, it looks like it works on the 2021 model but...

Which class and hitch do i need for a 2017 Hyundai Santa Fe Sport Ultimate AWD 2.0Turbo | The trailer hitch I recommend for your 2017 Hyundai Santa Fe Sport Ultimate is the etrailer Trailer Hitch Receiver # e98841 because it has a matte black...

Hello, How can I be certain that I am purchasing the correct hitch for my Sante Fe. Can you determine this if I provide the registration number. Thank you for your time | The Draw-Tite Max-Frame Trailer Hitch Receiver # DT25MR is confirmed...

If I get a C34ER trailer hitch, just want to confirm that it will fit a 2021 Sante Fe Hybrid Limited trim. And I will need a wiring kit... that would be the CU94FR? And finally, the install instructions that are linked to for the C34ER show...

Can you tell me what the best option is for a trailer wiring harness for a 2022 hyundai santa fe? | We have the exact trailer wiring harness you need for your 2022 Hyundai Santa Fe, with the best option being one from Tekonsha: - Tekonsha T-One...

What is the tow hitch rating in pounds? I ordered the Curt C13152 | The Curt Trailer Hitch Receiver part # C13152 is rated for up to 6,000 lbs. However, your 2017 Hyundai Santa Fe is only rated for 2,000 lbs unless you have the factory tow package...

I noticed that on my 2007 Hyundai Santa Fe GLS, it has a towing weight capacity of 1,650 lbs but the towing weight of part #75471 is 3,500 lbs. Is this the right part for my car? | The Draw-Tite Max-Frame Trailer Hitch Receiver # 75471 is a...