Hitch fit for 1997 Ford F-250 With Deep Drop Bumper
1997 F-250 heavy duty. Aftermarket bumper. What is the vertical from the point of bolting to the frame to the top of the hitch receiver and also to the bottom of the hitch receiver? Take a look at the diagram and photo. I am willing to...
Recommended 95 Inch Trailer Axle with 78 Inch Spring Seat Locations
i am looking for a 95 inch trailer axle without hubs with either a 78 in spring spacing or no spring perches welded on. is anything available? | For your 95 inch axle we only have 79-1/4 inch or 80 inch spring seats. You can add spring seats...
If I Add Overload Springs To My 1997 Ford F-250 Will I Have To Change The Frame Brackets?
I have a 97 Ford F-250 Heavy Duty and I am looking at the B and W gooseneck hitch. I was wondering if it would be okay to get the one for overload springs even though I dont have overload springs. Reason I am asking is because I might add...
Truck Camper Jack Replacements for 1998 Big Foot Truck Camper
I have a 1998 big foot 9.5 truck camper it has the type 1 motor head jacks all of but the right rear look good and run. but they dont seam to have any power. is there any thing to be done? also that right rear runs even slower and the corners...
Timbren Rear Suspension Enhancement System Instructions for 1997 Ford F-250- F-350 Heavy Duty
Timbren frtt350e bracket doesn’t fit truck bracket. Can send pictures. Thanks | I am sorry to hear you are having trouble installing the Timbren Rear Suspension Enhancement System item # TFRTT350E on your 1997 F-250 or F-350 Ford Heavy Duty....
Is the etrailer Electric Trailer Brake Kit Quality on Par With Other Brands
Why are these so much less than the other brands that you sell, are they lacking in quality? | The Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA and other etrailer branded brakes...
Can the Super Grip Chock Wheel Stabilizers for Tandem Axles be used with Tire Covers on
Can this item be used with wheel covers in place? If not can wheel covers be cut allow for placement of this item? | I contacted the manufacturer about if the Super Grip Chock Wheel Stabilizers for Tandem-Axle Trailers # UF21-001091 can be used...
Recommended Flat Towing Equipment For A 1997 Ford F-250 4x4
Hello, I have a 1997 Ford F250 4x4, 7.3L diesel, crew cab, automatic transmission. Can you confirm it can be towed 4 wheels down? | From what I can find in the online owner's manual your 1997 Ford F-250 can be towed with four wheels down if...
Is The Leveling Kit/Shock Absorber Available For The B&W Companion 5th Wheel Hitch?
I need to order a new leveling kit for the 5th wheel plate and a new shock absorber | I took a look for a replacement shock absorber, and a new leveling kit for your B&W Companion OEM 5th Wheel Hitch for Ford Super Duty Prep Package # BWRVK3305,...
Replacement Control Module For A Kwikee Step # 909508000 On A 1997 Rexal Air Bus Class A Motorhome
I have a Kwikee Step on our 1997 Rexal Air Bus Class A motorhome. I am looking for a new control module for it. The part # on it is 909508000. I do not know any more about it. Do you have these? | The Replacement Control Unit for Kwikee 40 Series...
Install Harness for Redarc Tow Pro Elite in 1997 Ford F-250
I need the part number for a factory plug in harness for a Redarc Tow Pro brake controller in a 97 ford F250 4x4 7.3 diesel. | The correct install harness for the Redarc Tow Pro Elite part # RED44FR in your 1997 Ford F-250 is the part # RED87FR. |
Recommended Louvered Tailgate For A 1997 Ford F-250 Heavy Duty
Looking for a louvered tail gate for my 1997 Ford F250. | For your 1997 Ford F-250 Heavy Duty, we have the Stromberg Carlson 100 Series 5th Wheel Tailgate # VG-100. This has an open design that improves your field of vision when driving and...
Class V Trailer Hitch for 1997 Ford F-350 Truck
Howdy, 1997 F-350 CCLB Dually. I have a question about which hitch receiver to use on my truck. I would want a class V hitch. I do have a ranch hand but it doesnt have lights built in. From the bottom of my truck frame rails to the bottom...
Factory Location for Brake Controller Wiring Harness Install on 1996 Ford F-250 or F-350 Models
Question and Answer 107270 showed the location for a 1999. Where is the factory trailer connector for a 96? | For a 1996 Ford F-250 or F-350 the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3035-P will be under the steering...
Where is Frame Width Measured on 1997 Ford F-250 For B&W Turnoverball Gooseneck
It’s saying it won’t work on a 34 inch frame where is that measurement coming from on the inside of the frame or on the exterior of the frame for the 1997 F250 HD gooseneck hitch | The measurement is taken from outside to outside of the frame...
Cooler Interference with the Curt Front Mount Hitch # 31310 on a 1997 Ford F-250 7.3L Diesel
Ordered up a front trailer hitch for my 97 Ford F-250 part # 31310 and upon receiving it , took it out of the mangled box and crawled under the truck to see if it matched up and it looks as if my inter cooler is in the way. Does this part not...
Towing Mirror Fit for 1997 Ford F-350
I would to know which extenders fit my 97 f350 with small black power mirrors | For your 1997 Ford F-350 with the smaller black power mirrors we have the CIPA towing mirrors part # CM11500 as a confirmed fit that will give you the wider viewing...
Front Mount Hitch Fitment for 1997 Ford F-250/F-350 Heavy Duty
Will this hitch fit a 1997 Ford F-SuperDuty? It looks similar to a F350 dually. Thanks | For a 1997 Ford F-250/F-350 Heavy Duty you can certainly use the Curt Front Mount Hitch # 31310 as long as it's the 4 wheel drive model. If you have the...
B and W Release Pin Won't Budge
I bought a 1997 F250 with a B and W turnover ball, The ball is in the down position and the release pin wont budge, I've tried parking at different angels, up hill, down hill sprayed a ton of PB Blaster, I am now unbolting the middle part of...
Hole Spacing on Redline # 117521-G U-bolt Plate
What are the center-center hole spacings on this plate? | I pulled one of the # 117521-G U-Bolt Plates from the warehouse, and measured it for you. You can see the dimensions in the photo I've edited for you. |
Measurement of Curt 3-Piece Trailer Hitch C15511 from End of Mounting Flange to Receiver Tube
What is the measurement from the end of the frame rail to the center of the hitch pin hole once this hitch is installed? I have an aftermarket bumper and Im trying to make sure this hitch will work with the drawbar Ive chosen to buy. Thanks!...
Does Westin Fey Rear Bumper # 20000-92230 Fit 1997 Ford F-250
Hello-I need a bumper for my 1997 Ford F250 HD truck. I am looking at part number 20000-92230-does that come with mounting hardware? Thanks very much. | For your 1997 Ford F-250 the Westin Fey rear bumper part # 20000-92230 that you referenced...
Front Mount Trailer Hitch for a 1997 Ford F-350 7.3 Liter Diesel 4x4
just want to make sure this is the correct product for my truck. 1997 F-350 crew cab 7.3, 4x4, xlt is this the correct front mount hitch for this truck, thanks for your reply. | The Curt front mount trailer hitch # 31310 is listed as a fit...
Does Demco Recon Need to Have Base Entirely on Truck
1997 F350 8’ bed with an Atwood 75064 over bed folding gooseneck hitch welded to a 3/8” thick 24”x48” steel plate which is bolted to the bed bolt heads are 40” across from each other. Does the DM8550045 work with this setup? I understand the...
Filter Your Search