Ford  x   >   F-350  x   >   2017  x   >   Convert-A-Ball  x   >   Roadmaster  x   >  

I would like to convert my standard double eye suspension system over to a slipper spring suspension with shock absorbers on the following: 1 2020 Grand Design Reflection 31MB 5th wheel 2 Dexter 5200 lb. 3inch diameter tandem axles 3 4 leaf...

Need some help and guidance. I am taking delivery of a 2020 Renegade Verona RV in July. I have been looking at towing my 2016 Mazda 6 on a tow dolly, but I also have a 2017 Ford F-350 4x4 that can be flat towed. Flat towing looks to be the...

When I depress the brake pedal on my 2017 F350 the pump runs very softly but the brakes don’t work. I notice the black wire labeled “+” on the 7 wire pigtail from my truck has no voltage. All the other connectors on the 7 wire work normally....

Hello I have a 2017 ford f350 shortbed with bandw turn over ball we just purchased a 2011 sabre fifthwheel camper that is already set up for the bandw goose neck ball. And people been telling us that this kind of setup is putting to much stress...

hi i have a 2017 F-350 diesel and a 2013 F-350 diesel dually. im looking at flat towing each other what equipment would i be needing? | We can get your 2017 Ford F-350 set up to be flat towed, and you'll need base plates, a tow bar, safety chains,...

Can you identify the appropriate rear sway bar for this truck 2017 Ford F-350 4x4 crew cab, long bed, diesel | There are a few different options for your 2017 Ford F-350 Super Duty (crew cab, long bed, diesel) depending on the application....

I have a 2017 ford lariat with the factory installed Curt puck system in the bed, the ball looks simular to the Reese pick shown in one of your answers on this question. Not recommended for use with factory-installed towing prep packages which...

I have 2017 F350 SD that has a 3inch receiver. I plan to install a 2-1/2inch Rock Tamer mud flap system to my truck using a Ford 3inch to 2-1/2inch reducing sleeve and I would like to use this product to keep everything solid and prevent the...

I have a 2017 F350 with a Curt 2.5inch receiver that has a very tight clearance with the bumper. Due to the clearance I can only tighten it from the bottom. I am running a Blue Ox 2.5inch Sway Pro WD Hitch that I would like to put tension in...

I have a 2022 Montana 3231CK and want to get the convert a ball so i dont have to change out to use. i read on one of the QandAs that they arent suggested for cross country trips, how long of trips are they good for? should i keep my BandW...

How much larger in diameter is this bar vs stock? | The Roadmaster Rear Anti-Sway Bar Item # RM-1139-173 is 1-3/8" diameter in size while the stock anti-sway bar on the 2017 Ford F-350 Super Duty is around 1/2" thick. Since your 2017 Ford...

do you have a video on how to locate the bulb placement on a ford F350 with led lights? | At this time we do not currently have a video of the installation process of the Roadmaster # RM-152-LED kit on a 2017 Ford F-350, but as soon as we do...

Does this carrier fit the subject wheel | Yes, your Westlake 215/80R17.5 tire will fit the Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening - 2" Hitches # RM-195225. This carrier holds 16" to 24-1/2" spares with any bolt hole...

I purchased a roadmaster #071 1075 10,000 lbs hitch extender none of the hitches we have fit into the extender it is to short by 1/16 to 1/8 inch | The Roadmaster Anti-Rattle Hitch Extender for Tow Bars # RM-071-1075 provides 7-3/4-inches of...

I have a 2017 Ford F350 Crew Cab 4x4 SRW with 6.2 liter gas engine. The sway bar you offer states it is for dual rear wheels. Do you have one for single rear wheels? My truck had the FX4 package, the Snow Plow package, 5th wheel / gooseneck...