Ford  x   >   F-250  x   >   Falcon  x   >  

1997 Ford F350 7.3L PSD: When no not pulling my motorcycle trailer, do I need to unplug the Curt, and then replug the vehicles OEM wiring harness so that taillights on truck will work again? | It does not; the taillights will continue to work...

I have a 1998 big foot 9.5 truck camper it has the type 1 motor head jacks all of but the right rear look good and run. but they dont seam to have any power. is there any thing to be done? also that right rear runs even slower and the corners...

I purchased two complete axles from you, I can not find one of the grease seals for the non braking hubs. Can I get another or at least get the correct part number from my records | Thanks for the info! Looks like you got the Dexter Trailer...

Where are the Americana Trailer wheels manufactured? | They are made in China. Dexstars are made in USA if that's what you are looking for. | 14 inch and I believe 5 x 4.5 | I attached a link to a page that has all of the Dexstar trailer wheels...

I have a Kwikee Step on our 1997 Rexal Air Bus Class A motorhome. I am looking for a new control module for it. The part # on it is 909508000. I do not know any more about it. Do you have these? | The Replacement Control Unit for Kwikee 40 Series...

Trying to find the correct replacement mounting bracket for my Pollak 7-pin trailer connector. Everything I see has the wrong bolt hole spacing. Mine is 2 1/2inch x 1 3/4inch center to center which is about 1/4inch larger than the brackets...

I am wondering what he distance is between the back side of the hitch plate and the hitch pin? I bought one hitch cover and it wouldnt work on my sons truck. Didnt want to have the same problem with this one too. His truck is a 1997 F250 Thanks...

Curious how much the 7000 lb. axle-less assemblies weigh and how they are shipped. Are they UPS-able ? Thanks | The Timbren Axle-Less Trailer Suspension System part # TASR7KS01 that you referenced has a shipping weight of 148 lbs. They are...

Can you give me the measurements of this bumper? It comes with every thing needed to install? | The Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Black Powder Coated Steel part # 20000-92230 measures 74" end to end. It comes...

I have a Class C Motorhome 28ft and I am looking for a new hitch that will support 5000lbs. My main frame is a C beam and was wondering if this is the correct hitch Multi-Fit Motorhome Trailer Hitch, 24 - 46 wide Item # 5350 Draw-Tite logo Thanks...

I have a1997 F250 HD and have installed a 38 gallon bronco tank in the rear. This forced me to relocate the spare tire to the bed. I would like to upgrade the factory tow hitch to the DT45502 but am not sure of the inner dimensions and therefore...

Hi. Im looking to order a 3 x 5 foldaway hitch bracket and had a question to ensure that I order everything I need to go with it. Your description states that I should also get the Titan Hydraulic Brake Line with Fittings - 25 Long. My question...

my 4 inch coupler total length is 30 inches is there longer ones that can lock | We do indeed have a longer locking gooseneck coupler. I'd recommend the Bulldog # BD0289250300 which has a fully extended length of 35-3/4 inches and a fully retracted...

I need the part number for a factory plug in harness for a Redarc Tow Pro brake controller in a 97 ford F250 4x4 7.3 diesel. | The correct install harness for the Redarc Tow Pro Elite part # RED44FR in your 1997 Ford F-250 is the part # RED87FR. |

As of right now truck has a 6 inch lift with 37 inch tires and your curt hitch which had a great and simple install thanks again. But now the truck rear end sags a good amount and I dont think thats safe for steering and possible bumps on the...

I had a wiring harness installed on a truck in the past and they put it on the drivers side as you suggest. Using the theory behind strapping down a load on a flat bed where the ratchet is on the passenger side in order that in case a road side...

Will a Drawtight trailer from a 1990 Ford F-350 truck fit on a 1997 Ford F-150 Truck? | All of the Draw-Tite trailer hitches for a 1990 Ford F-350 will fit a 1997 Ford F-250 or F-350 but only certain ones will fit the 1997 Ford F-150, like part...

I bought a 1997 F250 with a B and W turnover ball, The ball is in the down position and the release pin wont budge, I've tried parking at different angels, up hill, down hill sprayed a ton of PB Blaster, I am now unbolting the middle part of...

I need a rail install kit for a reese 16000 to mount in a 1997 f250 hd it is a kwik slide unit | In order to install the Pro Series 5th Wheel Trailer Hitch part # RP30075 in the bed of your 1997 Ford F-250 you will need to use the Reese Universal...

I purchased this pin from you: # 40107 Trailer Hitch Receiver Lock Ill be using it in a Curt class V 2inch hitch that I also purchased from you and will be pulling a 16k lb trailer here soon. Is there a weight rating associated with this pin?...

Will these running boards mount onto my 1997 Ford F-250 HD Supercab Longbed? It is an OBSOld Body Style which is square bodied, not round bodied. | For your 1997 Ford F-250 HD with the SuperCab you can use the 3" Round DeeZee Nerf Bars # DZ3700291...

I have a 1997 F350 with a Kelsey brake controller. Recently I noticed it does not work unless I use the manual override lever. I read a post on this site in regards to the Red wire could be the problem. What Ive done so far. Im Getting power...

I have a 97 f-350 7.3 liter Diesal and I need a wire harness for a seven prong plug to the factory wiring on the back of the truck and it has two plugs on the vehicle side replaced do you have that kind of harness | Thank you for providing a...

Wondering why is my Travel trailer brakes are not engaging evenly? The left side are grabbing stronger than the right side, They are adjusted evenly. | If you're certain that your trailer brakes are adjusted properly, then you likely have a...