Result: surface mount reverse light

illumination. For the reverse lights you can use something like the LumenX Surface Mounted LED Back-up Light | I have recently bought a CarMate enclosed trailer....

, and reverse) is the LumenX LED Trailer Tail Light part # 882K-7 which has LEDs so it will be bright. I have | Hi! Im writing for a recommendation for the brightest 4 inch round grommet mount led taillights...

Yes, the correct surface mount bracket for the LumenX LED RV Dome Light part # PE65CR | Im interested in purchasing this item: PE65CR In the video it is mentioned that you sell a surface mount...

Looking for a surface mount light kit with motion sensor built in for a 53’ refrigerated trailer | Looking for a surface mount light kit with motion sensor built in for a 53’ refrigerated trailer....

that was designed to be a low profile reverse light. | Do you have a low profile boat trailer light with back up white | We have the Peterson backup light part # 416K which is a recess mounted trailer clearance...

the metal frame as the ground, so this means that the bracket must be mounted to a metal surface on the cart | I have received the peterson license plate holder with light. It has one wire and I would like...

the reverse light circuit on your vehicle (or 7 way trailer plug) and tap into that in order to provide | I am looking for a backup alarm for our trailer. How are these installed? Where do they connect? Thanks...

that you have does use its steel mounting surface to make the ground connection required for proper | I spliced the single wire from the PM436B into the brown wire on the TL21RK, and it wont work. The bulb...

with mounting hardware because the hardware will be specific to the material of the mounting surface. | Does the mounting hardware come with the light? | Peterson Red Oblong, Two Bulb, Trailer...

is secured tightly to a clean surface on the frame. If the wire is attached to the body or a surface | On the right side the lights fine, unless I attach the light unit to the trailer its self then the lights...

If you have a strong magnetic surface on the side of your 2016 Jeep Wrangler you could very well | Can I use these on the side of my 2016 2 door jeep wrangler? No metal to attach at back. Thought I could stick them just on...

a round surface mount light that has a metal housing. | Is the housing made of plastic or metal? | The housing of the Peterson Round Trailer Tail Light with License Plate Light, 2 Stud Mounting,...

to be mounted to a metal surface connected to the trailer frame. | Wiring [432000] - is the brown wire running lights and the red wire stop and turn? Thanks | You are correct. The wires on the Peterson Round...

surface that is in direct contact with the trailer frame, a jumper wire will need to be ran from | Is this an exterior light? | The Peterson round utility light, part # 507-12 is suitable for interior or exterior applications. The...

for grounding the light. This requires that the light be mounted to a surface that is a good ground. If your | I just received this light. There is only one black wire coming...

fix the problem. Or if the main ground strap of the trailer is attached to a painted surface you could | The lights only seem to work when the trailer is grounded through the ball. The trailer is brand new, and it looks to...

this? Steel Mounting Bracket for Peterson Stud Mount Tail Lights - Surface Mount - Black Powder Coat | I need something like this but need the holes to be...

to the trailer or vehicle through the mounting hardware, so it needs to be mounted to a metal surface | how many wires? | The Trailer Clearance Light, 135A, part number 425200, has one wire...

they are connected to a clean metal surface or you can run a jumper wire from the mounting hardware back to the main | Just installed a new wiring harness on my trailer. Now only the turn signals work and...

surface or if the assembly grounds through the mounting hardware you will want to make sure that surface | right rear turn light on my trailer doesnt work or right side flasher either but all...

and mounting surface. | I was wondering if the PE77ZV part number comes with a mounting gasket. If not, does it need one and what would that part number be? | The LumenX LED Trailer Tail Light # PE77ZV does...

that light off and check the surface that its mounted to on all sides. If it isn't mounted to a good clean | Have just installed all new trailer wiring and lights, and a new...

to a clean and corrosion free bare metal surface. You can also make sure that the main ground from | I have two brake, lights, driving lights, and one right turn signal on my trailer, but the left one is solid. When testing...

to attach to a clean bare metal surface on the trailer. I have attached a short video review on this light | My trailer has lights similar to the 425000 but is a single wire light, do you offer such a light?...