Result: surface mount reverse light

I have a 2018 Ram2500 I wanted to use a removable auxiliary reverse light for plowing that I would | I have a 2018 Ram2500 I wanted to use a removable auxiliary reverse light for plowing that I would mount on...

it to the reverse light circuit on your truck. There is no custom fit connector made for this purpose though. You | I have small rear camera mounted to the top of the license plate. I also have a flat 4-pin...

to the surface of a trailer. The the only way to power this light using the Curt Auxiliary LED Indicator Lights | How can I attached Obtronics led license light to a pre-installed Curt aux...

to a clean metal surface. If there is any rust or paint you will not get a very good ground connection | i have a 04 ford ranger and i just got a old 6X10 trailer. i wiried the trailer myself and all went well i thought. anyway...

for a ground. The blue wire will go to your brake controller. The purple wire is used for reverse lights | How can I convert this so it works properly. I have a 1998 ford ranger and it has a 4-way round connector....

that this will work with my vehicle, as long as I wire the reverse light into to tail light to avoid BLIS or trailer | I ordered the OPT7 triple LED tail light bar, along with the CURT 55384....

LED Trailer Tail Light # STL178RFPB; this is a surface mounted light that is 7-1/2" wide x 3-5/16 | Looking for a complete LED submersible wiring kit for my 1991 ranger bass...

the metal contact surfaces for any signs of even slight greenish or whitish discoloration. Pay particular | Stop and Turn Signals work but the tail lights do not work on my 3-light bar on the hitch receiver. The hitch receiver...

the white wire to the truck frame, and mount the connector. The remaining wires are purple for reverse | I have a 4 way flat car connector to a 4 way flat trailer connector, works OK. I want to change these...

to a flat surface that has at least 8-5/8" wide x 3-1/4" tall x 2-5/16" long of space available | Can a license plate be mounted on this and look like it belongs there? | It wouldn't really be possible to mount a license plate...

will plug into the 4-way connector and just require you to splice the blue wire into the reverse light wire | I have a 2019 Ford Ranger What are all of the items I need in to be able to tow my boat. What is...

. I would recommend a surface mount 9-LED light, part # LIL9L. I have linked you to our product page | Where would I put the 9510 to protect my system? I would be pulling an old restored 69foot...

Width Modulated signal. You also need to prevent reverse power on the brake signal wire which is why | I have a 2020 ford ranger xl without factory tow package. I want to install the redark proportional brake controller but...