fall hauling headquarters

Radiator

Change Make

Select Vehicle Model

  
Radiator

Available Models for 1992 Toyota Radiator



What our customers are saying:

Absolutely fantastic. I placed my order Saturday afternoon, and got a confirmation Monday that it had been shipped. UPS Ground arrived Wednesday afternoon, and I could track it all the way. When it arrived, EVERYTHING was there. No back orders. And the quality was outstanding. My son was impressed with the merchandise and service, and will be ordering his own receiver soon. I rate this 5 stars! Thanks.

Earl

Ponchatoula, LA



Accessories



1992 Toyota Questions and Answers


  • RV Trailer Hitch For a Class-C 21 Foot Winnebago
  • RV style hitches can be bolted or welded on your Winnebago frame whereas most vehicles will have mounting holes preset for trailer hitches. I wouldn't recommend using a vehicle trailer hitch. The Curt hitch # 13086 you referenced is a confirmed fit for your 1992 Toyota pickup. For your motor home, the most likely hitch to fit is the Curt adjustable width trailer hitch receiver # 13703. It's a Class-III hitch and can be adjusted from 22-72 inches in width. It will have a gross trailer...
    view full answer...

  • Availability Of Trailer Hitch For 1994 Japanese Toyota Hilux Surf
  • I do know the Toyota 4Runner is known as the Toyota Hilux Surf in Japan. I do list one hitch for a 1994 Toyota 4Runner. It is the Draw-Tite Class III 2 Inch Hitch, part # 75145. It has a 5,000-lb gross towing weight capacity and a tongue weight capacity of 500 lbs. I cannot verify that it will fit your Toyota Hilux Surf, but I am including a link to the installation instructions that might help you decide if it will fit. If the hitch will fit some other parts you will need to complete...
    view full answer...

  • 4-Pole Trailer Wiring Harness for 1992 Toyota Pickup Truck
  • We do offer a 4-pole trailer wiring harness for your 1992 Toyota Pickup truck. Draw-Tite offers a plug-in harness that requires no cutting or splicing of wires, part # 118379. This harness installs at your two tail light assemblies with easy to use plug-in connectors. The only actual wiring needed is to attach the white ground wire's ring terminal to a clean bare-metal surface behind the driver's side tail light. The linked video will illustrate the process. You might want to add a...
    view full answer...

  • Will DeeZee Narrow Crossover Tool Box Part # DZ6160N Fit a 1992 Toyota Pick Up
  • According to our friends at DeeZee, the Crossover Tool Box you mentioned, part # DZ6160N will fit your boyfriends 1992 Toyota Pickup. The same box is also available in a black finish as part # DZ6160NB.
    view full answer...

  • How To Change Wrong 4-Way Connector On A Trailer From Vehicle End Connector To Trailer End Connector
  • I would recommend to use the Draw-Tite T-One Wiring Harness, # 118379, on your 1992 Toyota Pickup. This will give you the correct harness for your vehicle with a 4-pole flat connector at the rear of your vehicle. This harness will plug in behind the drivers side taillights and passenger side taillights. On your trailer you can remove the 4-pole flat vehicle end connector that is on there now and attach the Hopkins Quick Fix(TM) 4 Pole Flat Trailer End, # HMC20031. This will give you...
    view full answer...

  • Installation Tips and Bolt Thread Size for the Curt Trailer Hitch # 11227 on a 1992 Toyota Corolla
  • The bolts included with the Curt Trailer Hitch # 11227 are M12 - 1.25 x 40mm hex. All of the hardware included with this hitch is listed in the installation instructions, see link. On older vehicles it is a good idea to clean the threads with a wire brush, see video demonstration. The Battery Post and Terminal Cleaner, # DW00254, is a good choice for this purpose. Since your vehicle is a 1992 model, you may need to use a tap or make one. Using a identically sized bolt you can create...
    view full answer...

  • Flat-Towing Setup Recommendation for a 1992 Toyota Celica GT Convertible
  • The first thing you will need is a base plate kit to provide you with the attachment point on your 1992 Toyota Celica GT for a set of tow bars. For base plates I would recommend a Roadmaster Classic Base Plate Kit # 1125-1. For a tow bar I would recommend a RoadMaster Sterling All Terrain Tow Bar # RM-576. This comes with safety cables, wiring, and quick disconnects like the RM-201 that you referenced. I attached installation instructions for you to check out also. Next, you will...
    view full answer...

  • Troubleshooting Trailer with Non-Functioning Turn Signal Lights Behind a 1992 Toyota Pickup
  • This is the right harness for your 1992 Toyota Pickup. It sounds like you might be having a ground issue. Check the ground wire from the harness. Make sure it has direct metal to metal contact with the frame or body. Rust, corrosion and paint can insulate an electrical connection. Check the grounds for the tail lights on the trailer, make sure they have good metal to metal contact. Finally, check the the trailer ground wires, make sure again, that they have good metal-to-metal contact. You...
    view full answer...

  • Troubleshooting Plug and Play T-Connector Trailer Wiring Harness Not Working on a 1992 Toyota Pickup
  • As long as your vehicle is a 1992 Toyota Pickup and not some other model like a T100 pickup, you have the correct wiring harness. There are two possibilities for the symptoms you are describing. A ground issue or a short between the taillight circuit and turn signal circuits. Because there would need to be a short between both the left and right turn signal circuit and the ground I would think that would not be the issue, unless the converter box has been shorted out. Since you have...
    view full answer...

  • Troubleshooting a Pinched 4-way Trailer Wire Where Only the Running Lights Function
  • It sounds like you may still have some bad connections left in your 4-way trailer wire harness. I would go back and inspect all of the wires that got pinched and make sure they are all making good connections to the correct color wire. You will also want to make sure they are taped up and insulated well from each other to prevent the wires from shorting out on each other. If that does not fix the problem I would go back and look for other areas of the harness that may have been damaged...
    view full answer...

  • The Best Heavy Duty Roof Rack Recommendation for a 1992 Toyota 4Runner
  • I believe I might have a better solution for you since you are looking for heavy duty bars. If your 1992 Toyota 4Runner does not have any existing side rails, crossbars, or tracks (a naked roof) then I recommend a Rhino-Rack roof rack with heavy duty crossbars. You would need the following parts: Heavy Duty bars, # RB1250 Track Mount leg kit # RLTP Tracks # RRRTV148 The bars in this system are rated for 220 pounds. But you will need to consult the vehicle owners manual and/or...
    view full answer...

  • Trailer Hitch Recommendation for a 1992 Toyota Camry
  • For your 1992 Toyota Camry the Curt Hitch part # C11225 has been confirmed as a fit and would work well for you. This hitch has a 250 lb tongue weight and 2,500 lb total trailer weight capacity. You would need to be sure to stay under these capacities and the towing capacities of your vehicle that are listed in the owners manual. To complete your towing setup you would want the # C45572 for a ball mount with a 2 inch ball or part # C45571 for a 1-7/8 inch ball. For trailer wiring you...
    view full answer...

  • What is Needed to Flat Tow a 1992 Toyota 4Runner
  • This RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter, part # RM-033, is usually used to attach a set of Roadmaster base plate to Blue Ox or Demco towbars. If that is what you are looking to do this would work perfectly for you. The overall length of this product is 32 inches, from the outside of the bolt holes this product measures 25-1/2 inches. If you need a base plate kit I recommend the Roadmaster Classic Base Plate Kit, part # 1123-1. For tow bars I would recommend...
    view full answer...

  • Snow Plow Mount Recommendation for 1991 Toyota 4x4 For Detail K2 Rampage Plow
  • Yes, to use the K2 snow plow part # K2RAMP8219 that you referenced on your 1992 Toyota Truck 4x4 you would need the plow install hardware part # K285105. Prices are available at links below.
    view full answer...

  • Do Tire Chains that Fit Size 195/75-14 also Fit 195/75R14
  • The tire sizes you listed are essentially the same. The R in your tire size just means that it has a radial construction. The V-bar chains part # TC1840 that you mentioned do fit your tire size and would do an excellent job in heavy snow and ice. If you needed something that offered a bit better fender well clearance you would want the Titan chains part # TC1530 which also fit. These will install a bit quicker as well and are priced great.
    view full answer...

  • Troubleshooting Trailer Running Lights Not Working on Toyota Pickup
  • The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118379 is a confirmed fit for your 1992 Toyota pickup. With the turn signals working and emergency lights working but the running lights not working, the issue most likely is in the ground wire of your trailer. Here is how to troubleshoot. Use a circuit tester like # PTW2993 to check the pin function on each of the 3 power pins on your 4-way when the trailer is not connected. The running lights will be the brown...
    view full answer...

  • Will the Westin Fey Diamondstep Rear Bumper # 61000-93500 fit a 1992 Toyota Truck
  • Yes, the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit # 61000-93500 that you referenced is confirmed to fit Toyota trucks from 1989-1994 so it should work well for your 1992 Toyota truck.
    view full answer...

  • Tow Bar and Accessories for Flat Towing 1992 Toyota Previa Behind Box Truck
  • The first thing you'll want to do is determine if the Previa can be flat towed without damaging the drivetrain. Due to the age of the vehicle, I can't find any definitive information using my usual online sources, so I recommend you check with Toyota. For base plates, I'd recommend the Roadmaster # 1115-1. Although the Roadmaster Sterling tow bar you mention would work great for you, using the less-expensive Falcon 2, part # RM-520 would work just as well. Safety cables like # RM-643...
    view full answer...

  • Air Bag Helper Springs for a Lowered 1992 Toyota Pickup with 8.5 Inches Between Springs and Frame
  • Air Lift SlamAir kit # AL59102 is the one you will want to use on your lowered 1992 Toyota Pickup. It is designed if the measurement from the leaf spring stack to the frame is 8.5 inches or more. Since you are right at 8.5 inches this is the kit you will need.
    view full answer...

  • Trailer Hitch Fit by Draw Tite for 1992 Toyota Camry
  • For a Draw Tite hitch confirmed as a fit for your 1992 Toyota Camry you would want the part # 36336. The part number 36514 has been discontinued and the part # 36336 is basically the latest version of this hitch. You will also want the # 19256 for 1-7/8 in diameter or # 19258 for 2 inch diameter hitch ball. I also recommend ball mount part # 119179KIT and T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118308.
    view full answer...

  • Replacement Bumper and Mount Kit for a 1992 Toyota 4x4 Pickup Truck
  • The replacement bumper and custom mount kit # 61000-93500 does fit your 1992 Toyota pickup. I have included a link to all of the bumpers that we have that will fit your truck.
    view full answer...

  • Running Lights Not Working on Trailer
  • For starters, you will want to turn the vehicle on and test the running light circuit (brown wire) on the vehicle's 4-way with a circuit tester like part # ALL640595. If power is present then you know the problem in on the trailer. If power is not present then you know the problem is on the vehicle. If the error is on the vehicle side then you will first want to start by checking the fuse box to see if any fuses associated with the trailer or running lights are blown. If not you can...
    view full answer...

  • Does Curt Hitch # C11227 Fit 1992 Toyota Celica
  • For your 1992 Toyota Celica the Curt hitch part # C11227 is a confirmed fit. We don't have an install video at this time but we do have the install instructions that state that the hitch is designed to bolt up to the weld nuts on the rear bumper beam. It says also that the "area must be clear for bracket to fit directly against metal bumper". Sounds like you'll need to trim the fascia like what the next step of the instructions mention.
    view full answer...

  • Trailer Hitch, Ball Mount, Ball, and Wiring Recommendation for a 2006 Toyota Camry Sedan
  • The Curt hitch, # 11225, for the 1992 Toyota Camry wagon will only fit 1992 to 1996 wagon models. The 2006 Toyota Camry sedan requires a complete different hitch. I have included a link to the available options for you. The most popular hitch for the 2006 is # 36336 from Draw-Tite. I have included a link to the installation instructions and a link to a video showing a typical installation. If you plan on doing some towing, the correct ball mount is # 36061 and you can use pin and clip...
    view full answer...

  • Troubleshooting Trailer Fuses Blowing on a 1992 Toyota Truck When Put in Reverse with a Trailer
  • Sounds like your taillights and trailer lights are overdrawing your 1992 Toyota Pickup and that is why the fuse is blowing. When you put your truck in reverse you have your foot on the brake which is activating the trailer brake lights as well as the truck brake lights, and then when the reverse lights of the truck come on additional amperage is being pulled and most likely causing the fuse to blow. What needs to happen is the amperage draw of your trailer needs to be reduced. The easiest...
    view full answer...

  • Ladder Rack Recommendations for a 1992 Toyota Pickup
  • The only TracRac ladder rack listed for the bed of a 1992 Toyota truck is # TH14750. A TracOne model is not available for this vehicle. But you can use a ladder rack from Yakima, # Y01136-Y00409 rated for 300 pounds. The width of the tops of the bed sides on the truck are not an issue. Another, similar rack that you can use is # CG-902. It is rated for 500 pounds.
    view full answer...

  • How Do I Determine Which Replacement Bearings I Need For a Trailer
  • Based on your inner diameter of 1-1/16 (1.063 inches) the replacement trailer hub bearings you need are # L44649. The matching race is # L44610. I highly recommend measuring the bearings and seals with a digital caliper tool to the thousandth of an inch. You would need to remove your hub to obtain. See the diagram to the right. I have included a FAQ and video review for you too.
    view full answer...

  • Base Plate Recommendations for a 1992 Toyota 4Runner
  • The most economically priced base plate kit for the 1992 Toyota 4Runner that we offer is the Roadmaster Classic Base Plate Kit # 1123-1. If you need a tow bar setup I recommend the RoadMaster Sterling All Terrain Tow Bar # RM-576. This tow bar comes with safety cables, wiring and quick-disconnects also. I attached installation instructions for you to check out also. The next component you will need to flat tow the vehicle is lighting. There are actually several lighting methods depending...
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.