Product Experts Available Now!
Call 800-298-8924
Does Trailer Hub Assembly for 2,000 Pound Axles Include Bearings and What Spindle Will Fit
Question:
Does trailer hub AKIHUB-440-2-1K come with the bearing assy? Which spindle goes/matches this particular hub, is their a part no?
asked by: Ellis S
0
Expert Reply:
The inner and outer bearings, races, seals and cap are all included. We carry three spindles that will fit this hub. The differences is the shanks that are to be welded to the axle, but the machined portions will fit the hub assembly you were looking at.
The spindles are part # TRU94FR, part # TRU59FR, and part # TRU97FR.
expert reply by: Patrick B
0
Products Referenced in This Question
BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Trailer Spindles
- Standard Spindle
- 8-1/4 Inch Long
- 1-3/8 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Replacement Hubs for 1992 Jet Ski Trailer
- Recommended Trailer Hubs and Spindles
- How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Replacement Idler Hub Recommendation For Boat Trailer With 07100 Bearings
- What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Difference Between an Idler Hub and a Hub/Drum
- Pre-Greased Hub Assembly With L44643 Hub Bearings
- Replacement Axle and Hubs for Small Boat Trailer that Used Super Lube Hubs
- Replacement Hub for a Harbor Freight Trailer
- Recommended Hub And Bearings For Correct Fit On 2000 lb Axle
- Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Recommended Replacement Hub Assemblies for a Trailex Trailer with a 8 inch Wheel with 4 Bolts
- Is There Difference Between etrailer.com and Dexter Hubs that Fit 1 inch Spindle
- Replacement Hub for a 3/4 Inch Diameter Straight Spindle
- Pre-Greased Hub with 4 on 4 Bolt Pattern and L44643 Bearings Already Installed
- 4 Lug Hub Replacement for Hub Marked BT100
- Replacement Trailer Hubs for 1 Inch Inner diameter Bearings
- Replacement Trailer Fenders for a 4x8 Haul Master Folding Trailer
- How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Replacement Fender Mounting Brackets for Haul Master Trailer
- Finding Replacement Hubs for 1998 Triton XT Snowmobile Trailer
- Information Needed to Pick Out New Hub for Jayco Pop Up
- Replacing 4.80-12 Trailer Tires with a Larger Size on a Harbor Freight Trailer
- Replacement Hub for a Haul Master Kit Trailer with 30205 Bearings
- Availability of 4 on 4 inch Bolt Pattern Hubs for a Spindle with 1 inch Inner and outer Bearings
- Are Replacement Hubs Available for a Harbor Freight Trailer
- Stud Installation on Dexter Axle Trailer Hub Assembly # AKIHUB-440-2-1K
- Trailer Hub Recommendation for Hub on Trailer with 1-1/16" Spindle Diameter
Follow up Questions