Parts Needed to Flat Tow a 2014 Jeep Wrangler with a Towable Bumper  

Question:

Expert Reply:

We have the parts you need to flat tow your 2014 Jeep Wrangler, but I do recommend checking to make sure your bumper is rated for flat towing - we've seen quite a few Jeep bumpers that have the tabs at the front but unless the company has rated that bumper for flat towing you'll need to get a base plate kit instead. Should your bumper be rated for flat towing here are the parts I recommend:

- Falcon All Terrain Tow Bar # RM-522
- Bumper Adapter # RM-035 (for 3/4" D-Ring mounts) OR # RM-035-1 (for 1" D-Ring mounts)
- Flexo-Coil Wiring Kit # RM-15267
- Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494
- High-Low Adapter (see attached article)

It also looks like your battery will need to be disconnected for flat towing so if you'll be flat towing fairly often then I recommend checking out the Battery Disconnect with Switch # RM-766 as well since it makes disconnecting your battery as simple as pushing a button.

You'll also need some safety cables like part # RM-643 if you don't already have some.

expert reply by: Jon G

0