Is an Adapter Needed To Flat Tow a 2012 Jeep Wrangler if the Motorhome has 7-Way Blade Connector
Question:
I have a 2012 Tiffin Allegro Breeze 32 that Im trying to set up to tow a 2012 Wrangler Sport. The Breeze has separate amber turn and red stop lights, and has a 7 pin wiring connector at the stern. I Am using a Blue Ox Aventa towbar, which has a 7 to 6 pin wiring cable, and the Blue Ox Accessory Kit # Bx88231. Question is, do I need a taillight converter anywhere? If so, which one? Thankls.
asked by: Al M
Expert Reply:
As long as the 7-way on your Motorhome is wired as a combined system (which is how most are wired) then you will not need a taillight converter.
If the motorhome connection is combined, the umbilical is combined (7-way and 6-pin cord), and the Jeep is combined, all the systems are combined and compatible. To test and make sure that the 7-way is wired as a combined system, you can use a circuit tester like the Draw-Tite Circuit Tester # PTW2993 and test the blades on the 9 o'clock position and the 3 o'clock position with the brakes activated on the motorhome. Next, test the same blade locations with the turn signals activated. You should get signal on both of the pin locations if the 7-way is wired as a combined system with the brakes activated and the turn signals on. Therefore, confirming that your 7-way is a combined wiring configuration.
Please also keep in mind that you may need other safety items like the safety cables and supplemental braking system. If you do not have these then please let me know, and I can make additional recommendations for you.
Products Referenced in This Question
Product Page this Question was Asked From
Blue Ox Accessory Kit for Alpha 2 Tow Bars - Tail Light Wiring - 7-Way to 6-Way Cable - Lock Set
- Accessories and Parts
- Tow Bar
- Accessories Kit
- Aventa LX
- Blue Ox
more information >
Continue Researching
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: Diode Recommendation to Prevent Trailer Battery From Backfeeding onto Vehicle Wiring
- Q&A: How Does the Hopkins Wiring Kit and The Tekonsha T-One Harness Install Together
- Q&A: Recommended Diode for Charging Line From Motorhome to Towed Vehicle (Toad)
- Q&A: What do I Need to Install the Demco Air Force One with My 2019 Ford F-150?
- Q&A: What Torque are Bolts in Blue Ox Base Plate Kit Tightened To
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Article: How to Choose a High-Low Adapter
- Q&A: Replacement Red Fuse for Demco Air Force One Supplemental Braking System
- Article: Flat Towing Package for 2008-2009 Jeep Liberty
- Article: The Definitive, Step-by-Step Flat Towing Setup Guide