Can TV Travel On MORryde Portable Wall RV TV Mount and Docking Stations

Question

Question:

Can you travel with the TV mounted to the Docking station?

asked by: Paul

0

Expert Reply:

Yes, it is completely safe to travel with your TV on the MORryde Portable Wall RV TV Mount w/ 2 Docking Stations # MR94RR. While you do get the ability to remove the TV without having to mess with hardware, the brackets are a really snug fit so you don't have to worry about the TV being jostled around and/or out of the wall bracket.

I confirmed all of this with my contact at MORryde and I've attached a review video for you to check out.

expert reply by: Jon G

0

Answer 1

For your application you'll need to swap out the 50A female twist lock with a standard female connector like the Camco #CAM55353. RV connectors and adapters are designed to connect to the twist lock receptacle on the RV inlet and then plug into…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 6

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 7

To add a hitch to your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity…

view full answer...

Can TV Travel On MORryde Portable Wall RV TV Mount and Docking Stations

Featured Help Information

Miscellaneous Media

Continue Researching