Replacement Hub/Drum for Trailer with Inner Bearing Number of L68149
Question:
what hub for trailer with inner bearing L58149? 2012 Arctic Fox 22GQ trailer. Also spindle is rough. How to smooth this?
asked by: Jim
Helpful Expert Reply:
I believe you meant to type # L68149 for the bearing number which is correct for 3,500 lb trailer axles. So for a hub/drum that would fit that you'd want the part # AKHD-545-35-EZ-K and you'd be set. Smoothing out a rough spindle can be challenging as the bearings are a precision fit so if you take off too much material they won't fit properly. Typically you have to replace the entire spindle like with the # TRU74FR which comes with a brake mounting flange. You'd need to have someone with experience with these install it since it is a precision job.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Can A Bent Axle Cause Uneven Wear On Inside Of Tires?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Spindle/Hub Components For A Dexter 4K D40 Trailer Axle
- Q&A: What is the Best Grease for Trailer Bearings
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Converting Hubs From Grease To Oil Bath On 2014 Outback 298RE Travel Trailer
- Q&A: Replacement Axle for a 4,400 lbs AL-KO Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacement Bearings, Grease Seals, And Brake Assemblies For Lippert Trailer Axle V000163950
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)