View Cart

Will the Kodiak Disc Brake Kit #K2HR35D Work with an EZ Lube Spindle

Question:

Will these work on an axle with an ez-lube spindle?

0

Expert Reply:

The Kodiak Disc Brake Kit # K2HR35D that you referenced will work with an EZ Lube Spindle as long the components are rated for the same weight capacity, and the dimensions of the bearings are compatible. The type of spindle is not a considering factor, as long as the bearing numbers and diameters are compatible.

For example this Kodiak Disc Brake Kit would be compatible with an EZ Lube spindle that is rated for up to 3,500 pounds, and that has compatible bearings, races (which are included with the disk brake set), and seals. The bearings and seals on an # 84 Spindle that would work with the Kodiak disc brake assembly have the following part numbers:

Bearings (sold separately)
Inner bearing: L68149
Outer bearing: L4464
Seal: RG06-050 (sold separately)
Inner diameter: 1.719"
Outer diameter: 2.565"

A compatible EZ Lube Spindle for this disc brake set is the EZ Lube Spindle # R20384EZ. This is considered a # 84 Spindle, and the bearings associated with this spindle have the same part numbers as the Kodiak Disc Brake assembly, and the spindle accommodates the same bearing dimensions.

You may also be interested in the EZ Lube Grease Cap # RG04-040 for use with the Kodiac disc brake and EZ Lube spindle.

I have included links to the parts listed above, an install video, and a two helpful articles for your reference.

expert reply by:
0
Rachael H

Ask The Experts a Question >>


Products Referenced in This Question



Product Page this Question was Asked From


Similar Expert Q&A Pages

See More Q&A Expert Answers >>