Does the Draw-Tite # 75234 Allow Me to Use My Hands-Free Liftgate Sensor on My 2021 Ford Edge?
Question:
does the draw-tite hitch 75234 allow me to use my hands-free liftgate to work on my 2021 ford edge?
asked by: Bernard
Expert Reply:
Yes! The Draw-Tite Hitch # 75234 will work with your hands-free liftgate sensor on your 2021 Ford Edge. You will just need to have a little wider kick to activate the sensor once the hitch is installed.
If you plan on towing with the hitch, I recommend a ball/ball mount like the ones included in the Curt Towing Starter Kit # C45534. Not only does this kit come with a hitch cover, but it also comes with a locking hitch pin. Also, if you need trailer wiring, I recommend the following harnesses based on your submodel:
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C89FR (for SE and SEL models)
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C73FR (for Titanium models)
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118805 (for non-Titanium models)
With all of these wiring harnesses, you will have basic brake light, turn signal, and running light functions. As with all hitches and towing applications, I recommend that you consult with your vehicle's owner's manual to make sure your vehicle can accommodate the weight you wish to transport.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Visible
- Tekonsha
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- One Ball
- 2 Inch Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Pre-Torqued
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Visible
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Visible
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 4500 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Most Concealed Hitch for a 2023 Ford Edge
- Q&A: Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon
- Q&A: What Supplemental Braking System Should be Used with Two Different Tow Vehicles with Diff Brakes
- Q&A: Recommended Trailer Hitch And Wiring For A 2025 Kia Sorento PHEV
- Q&A: Determining Ground Clearance & Approach Angle w/ Trailer Hitch Receiver On 2018 Lincoln MKX Reserve
- Q&A: Draw-Tite or etrailer? Which Hitch is Better for a 2018 Ford Edge SEL
- Q&A: Why Does My Blue Ox Ascent Tow Bar Need To Be Level
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller Installation on a Ford Full-Size Van
- Article: My Trailer Hitch Doesn't Fit
- Article: Which Hitches are Made in the USA
- Article: How to Accurately Measure Trailer Leaf Springs