How to Tell if Shock Absorber on Titan Model 60 Hydraulic Brake Trailer Coupler Needs Replacement
Question:
I am rebuilding my Dico/Titan Model 60 surge drum brake actuator. I am replacing my brake master cylinder assembly, including the spring/push rod. Is there a procedure to bench test the shock absorber to determine need for replacement, before reassembling actuator and re-installing on trailer? Thanks.
asked by: Woody
Expert Reply:
According to Dexter Axle, who purchased Titan a few years back there really isn't a definitive method to bench test the shock absorber used in the Titan Model 60 coupler. If you can easily move the shock by hand, it's worn to the point where it should be replaced. It should take a significant amount of force to move the shock.
Should it need replacing, the # T2336200 replacement shock would be the proper replacement.
Products Referenced in This Question
Replacement Shock Absorber for Dexter Model 60 Brake Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Shocks
- Dexter
more information >
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Bolt-On
- 7000 lbs GTW
- 1-7/8 Inch Ball Coupler
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Shop: Replacement Shock Absorber Spring Kit for Dexter Brake Actuators
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Video: Review of the Replacement Shock Absorber Spring Kit for Dexter Brake Actuators
- Search Results: akhd~545~35~g~k
- Shop: Replacement Master Cylinder Assembly for Dexter Brake Actuators - Drum Brakes
- Video: What to Know About the Replacement Push Rod Assembly for Dexter Model 60 Brake Actuator
- Video: Checking Out the Replacement Push Rod Assembly for Demco Brake Actuators with 1-1/4" Bore
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Video: Replacement Shock Absorber for Dexter Model 60 Brake Actuators Spec Review
- Video: Checking Out the Replacement Breakaway Cable for Dexter Model 60 Brake Actuators
- Video: Review of Dexter Axle Emergency Break Away Cable Repair Kit - DX64XR
- Search Results: titan model 60 actuator
- Search Results: breakaway cable
- Shop: Replacement Push Rod Assembly for Dexter Model 60 Brake Actuator
- Shop: Replacement Push Rod Assembly for Demco Brake Actuators with 1-1/4" Bore
- Q&A: Replacement Master Cylinder, Shock and Push Rod Assembly for Dico Model 60 Drum Brake Actuator
- Video: Comprehensive Review: Spring-Eye Bolt with Locknut for Slipper Springs
- Search Results: 10 inch hub drum
- Shop: Replacement Master Cylinder Assembly for Dexter Model 60 Brake Actuators - Disc
- Q&A: What are the Retracted and Extended Lengths of the Replacement Shock for Model 60 Actuators
- Q&A: Replacement Solution for UFP A-60 Breakaway Key and Cable
- Q&A: Troubleshooting Breakaway Lever On Titan Leverlock Brake Actuator
- Q&A: Replacement Master Cylinder and Shock Recommendation for Trailer with Model 60 Actuator
- Q&A: Replacement Brake Away Cable For A Dexter A-60
- Q&A: Troubleshooting Trailer Hubs That Show Different Operating Temperatures
- Search Results: ufp a60
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: leaf spring
- Article: How to Accurately Measure Trailer Leaf Springs
on Straight Tongue Trailer Coupler
