How to Choose Correct Replacement Axle For Trailer  

The spindles on the Dexter Axle #T3584F-8974 has the following measurements: A 1.75 inches B 1.719 inches C 1.378 inches D 1.063 inches E 1 inch

Yes, the Dexter axle part #7359765 that you referenced uses the same 84 spindle that you have measures. This will allow you to reuse your current hubs and bearings.

We don't have replacement parts for a GDC 100 actuator but we do have replacements for it that would work great like the #T4750820. This is a higher capacity disc brake actuator with an electric lock out.

We do offer trailer axles that already have the spindle and some even come with brakes! I do not recommend modifying the length on any trailer axles, though, because they have been manufactured for a specific purpose and any modification could…

We do offer a limited selection of 3500 lb trailer axles. To determine if any of them would be compatible with your trailer, I'd need to know the hub face to hub face dimension and the distance between the spring seat centers. I'm…

In order to choose the correct replacement axle for a trailer you'll first want to start with the weight capacity. The weight capacity can be found on the axle tag in the center of the beam. Then, you'll need to measure the hub face (center…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

You will need to measure the diameter of the spindles where the seal and bearings ride. Check out the picture I attached that shows where this is. You will need an exact measurement so either a digital or dial caliper will be needed. To pick out the…