Is Hopkins Tow Bar Wiring for a 2000 Jeep Wrangler Compatible with Blue Ox Patriot Braking System  

The wiring harness that is designed for your 2006 Jeep TJ that plugs into the motorhome is part #HM56202. This plugs directly into the Jeep wiring behind the tail lights and includes the wiring with a 4-way trailer connector that will be run to the…

A pretty simple "plug and play" option light kit for towing your 2006 Jeep Wrangler behind your RV is the Hopkins Customer Tail Light Kit Item #HM56202. This wires your Jeep Wrangler with signal lights for braking, turning, and general tail…

The issues you're seeing won't be caused by not adding a relay to the wiring when you installed the #HM56202 and Brake Buddy Stealth #HM39530 and since you've already checked all of your ground wires I recommend moving on the the #HM56202…

I spoke with my contact at Demco and you can rest easy because he said accidentally leaving the switch on for the Stay-In-Play DUO Braking System #SM99251 while driving the vehicle isn't going to cause any actual harm to the system or the Jeep.…

The Hopkins Custom Tail Light Wiring Kit part #HM56202 will work in conjunction with the Hopkins Plug-In Simple Vehicle Wiring Harness part #42615. The wiring harnesses will plug into one another and then "T" into the vehicle's lights…

In order for this wiring harness to be installed correctly, you will have to unplug the brake wires on your 1998 Jeep Wrangler. Your wiring harness, the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, part #HM56202, should have two plugs per…

Yes. You can use the Hopkins Custom Tail Light Wiring Kit #HM56202 on your 2003 Jeep TJ Wrangler that has the Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251. I've linked an installation video of the Hopkins kit on a similar TJ…

To determine where the problem is I ask you to disconnect the Hopkins harness #HM56202 from the passenger's side and plug the vehicle tail light wiring in like normal. If the right turn signal still does not work then the bulb could have blown or…

You most likely have a bad ground, loose connection somewhere in your wiring, or the converter box you're using is malfunctioning and causing this issue. You can start by examining your wiring to ensure there are no loose connections or damage to…

The Hopkins Custom Tail Light Wiring Kit #HM56202 that you referenced was designed to fit your 2004 Jeep Wrangler's taillight configuration of separate turn signals from stop signals so it will fit and function really well. It combines the…

Since you can't install custom fit trailer wiring and tow bar wiring at the same time that both use the taillight connectors as how they wire in you'll need to hardwire in a universal trailer wiring kit like the #119250KIT which is a zero…

Thank you for your purchase from etrailer of the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56202. If the signals on your Jeep are not working when connected to your RV you'll want to check a couple things; we know it's on the…