5 on 4 1/2 Dexter Hub for Homemade Trailer
Question:
Hello, I have a home made trailer that I am trying to convert to 5 on 4 1/2 Hub. The ID on the spindle is 1.38 measured by digital caliber and 1.16 OD. Do you have anything to fit that? Or do you need more information? Thanks,
asked by: Greg
0
Expert Reply:
Thanks for the measurements. I recommend the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 item # 84546UC3-EZ. This hub fits 3,500-lb axles. It has an inner bearing of item # L68149 and race, outer bearing item # L44649, which is slightly small, and race, grease seal, grease cap, wheel bolts, and lug nuts included.
expert reply by: Jerred H
0
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter Axle
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- How to Determine Correct Idler Hub Assembly for Trailer With 3,500 lb Axles
- Locating Replacement Hubs that Use Same Inner and Outer Bearing
- Recommended Hubs and Axle for 1984 Skipper Boat Trailer with 5 on 4-3/4 Inch Bolt Pattern
- Looking for 5 on 4-3/4 Inch Bolt Pattern Idler Hub Compatible with L44649 Inner and Outer Bearings
- What Bearing Buddy Fits Trailer Hub # AKIHUB-5475-35-K
- Bolt Pattern Referred To In Hub and Wheel Fit
- Hub Bore Diameter of Trailer Idler Hub Assembly AKIHUB-5475-35-K
- Hub Recommendaiton for Trailer with 5 on 4-3/4 inch Bolt Pattern
- Hubs for 3,500 lb Axle with 5 on 4-3/4 inch Bolt Pattern
- Spindle for Trailer to Use with Hub that has 5 on 4-3/4 inch Bolt Pattern