Trailer Hitch that Fits 2020 Honda CR-V Hybrid

Question

Question:

Do you have a trailer hitch to fit a Honda CR-V hybrid 2020

asked by: Sherry M

0

Expert Reply:

Yes we have the etrailer hitch part # e98848 that fits your 2020 Honda CR-V hybrid. This is a mostly hidden hitch with a 2 inch opening that I attached an install video for to this page.

expert reply by: Jameson C

0

Answer 1

For your 2018 Honda CR-V there are two different Class III hitch designs overall. There's the no-trim Draw Tite like part #76128 which has more of the hitch hanging under the rear of it but like mentioned does not require any trimming. Then…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

It's required to trim the bumper fascia for all trailer hitch options on a 2022 Honda CR-V including the etrailer Trailer Hitch Receiver part #e98848. That said, the trimming required is very minor which you can see in the attached photo below.

view full answer...

Answer 4

The best trailer hitch receiver for your 2021 Honda CR-V (which fits all models, including your Sport), is the following: - Draw-Tite Trailer Hitch Receiver #DT79MR There's a couple of reasons for that, starting with the fact it has excellent…

view full answer...

Answer 5

Yes, we do have a hitch that will fit your 2022 Honda CR-V Hybrid Touring. It is the EcoHitch Hidden Trailer Hitch Receiver item #306-X7345. This hitch is custom fit and bolts directly to your CR-V's frame with included hardware. If you look…

view full answer...

Answer 6

We do have a couple options for your 2022 Honda CR-V, however I recommend the EcoHitch Hidden Trailer Hitch Receiver #306-X7345. This hitch is capable of handling up to 3,500lbs trailer weight, and 525lbs of tongue weight. For wiring, I recommend the…

view full answer...

Answer 7

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76128 will not fit a 2020 Honda CR-V Hybrid per Draw-Tite because of the cross tube location. Instead, I recommend the etrailer Trailer Hitch Receiver part #e98848 which will fit Hybrid models.

view full answer...

Answer 8

Sometimes we've heard that someone can get the sensor to pick up their foot to either side of the hitch receiver, like the etrailer #e98848 for your 2021 Honda CR-V Touring, but this isn't a concrete thing and can be hit and miss as…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Trailer Hitch that Fits 2020 Honda CR-V Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching