Bearing Buddy Fit for 1987 Fireball 5th Wheel
Question:
1987, 24 foot, Fireball 5th Wheel. What Bearing Buddys do I need?
asked by: Dale L
Expert Reply:
I'm unable to look up which Bearing Buddies you'd need for your 5th wheel, but it's pretty easy to figure out which ones you'll need.
All you'll need to do is figure out which outer bearing the hubs use. Pull one of the hubs and carefully pull the outer bearing and wipe it down with a paper towel. The bearing cage should list a reference number on the side, such as # L44649. If you look up the # L44649 bearing on our website, you can see that it uses the # L44610 race which has a 1.980 inch outer diameter which would be the same outer diameter that the Bearing Buddy you use would need to have. In this instance, the # BB1980A-SS you'd looked at would be the correct Bearing Buddy fit for a hub that uses an # L44649 or # L44643 outer bearing.
If the bearing doesn't have a reference number on it, use a digital caliper like part # PTW80157 to measure the bearing's inside diameter (a ruler or measuring tape won't provide an accurate enough measurement).
I've linked to a table that matches up the bearing reference numbers to their inside diameter and to which race they use. If you struggle with the linked chart, you can simply reply with the inside diameter of the outer wheel bearing and I'd be happy to figure it out for you.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Q&A: Issue with Bearing Buddy Leaking Grease from Overfill Port
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Can etrailer 2,000 lb Axle be Flipped
- Article: Trailer Wiring Diagrams
- Q&A: Idler Hubs, Bearings, Seals and Grease For a 2015 V22L ShoreLand'r Boat Trailer
- Q&A: Does Bearing Buddy Seal Kit # BB60002 Fit 3,500 lb Trailer Axle
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Overview of Lubricating Grease