What Differences Between etrailer Locking Hitch Pin e98880 and e98882  

Neither the item #e98882 and the item #e98880 locking hitch pins have an official weight capacity because it exceeds what the trailer hitches are capable of. They can easily handle a 2015 Fiat 500 being flat towed behind your Forest River RV. I…

Trailer Hitch Pins like the etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome #e98880 and #e98881 you were looking at do not have a specific weight rating due to them being so much stronger than the…

Trailer Hitch Lock Part #e98880 uses a 5/8-inch pin to lock your ball mount or hitch-mounted accessory to your trailer hitch. This is intended for 2 inch Class III and Class IV receivers. Typically class II receivers have a 1-1/4-inch opening and…

We have exactly what you are looking for. The Trailer Hitch Receiver Lock #e98880 is designed for 2 inch hitch receivers, has a 5/8" pin diameter, and has the option to be ordered keyed alike. When you order it you will simply select…

Locks are not included with the Reese Cargo Carrier #63153 that you referenced but I can absolutely recommend a lock that will work perfectly. To secure the carrier to your vehicle I highly recommend the etrailer.com Trailer Hitch Receiver Lock…

The span you refer to on the etrailer Trailer Hitch Receiver Lock for 2" Hitches #e98880 is the usable length of the pin. To properly measure for this, you can measure the outside walls of your hitch at the pin hole. If you measured, and…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

If your highlander came with a factory trailer hitch and factory 7-way connector, then it is likely that it came with the tow package. If your vehicle did not come with a trailer hitch and 7-way trailer connector, it likely did not come with a tow…