Availability Of Replacement Covers For Solera Power Awning Idler Head  

While you can still use the Blue Ox 2-Point Weight Distribution w/ Sway Control #BLU75FR without the weight distribution bars, I recommend using a lighter set of spring bars. You can use the Replacement Spring Bars #BLU94XR with a trailer that has…

I reached out to my contact at Lippert and the correct replacement back cover compatible with the Replacement Cover for Solera Regal Power Awning Speaker Idler Head - Front - Black #LC731464 you were looking at is the Replacement Cover for Solera…

In order to separate two awning head covers such as the Solera Awning Plain Drive Head Front Cover part #LC289560 and the Solera Awning Plain Drive Head Back Cover part #LC289561 you'll need to remove the screws which are accessed from the back…

For the Replacement Cover for Solera Awnings #LC643923 for the idler head, and the Replacement Cover for Solera Awnings #LC643922 for the drive head, you can use the: -Replacement Solera Manual Awning Head Cover Fastener #LC266156, which are #6 x…

To replace the screws on the Front Cover for Solera Power RV Awnings item #LC643922 you will want the Replacement Solera Manual Awning Head Cover Fastener item #LC266156. These are #6 pan head screws that are a 1/2" in diameter. We do not carry…

For your Solera Awning, you can use the Replacement Cover for Solera Awnings #LC643923 for the front, and the Replacement Cover for Solera Awning #LC643921 for the back. I have included a couple of videos for you to check out as well.

The install of the Replacement Cover for Solera Awnings #LC643923 is pretty simple. It's basically held on with just two screws that you'll easily be able to locate on the old head you have now. Since this cover does not come with screws…

To remove the front cover #LC643923 from your Solera Awning there are indeed 2 screws that need to be removed. If you look at the back f the idler head unit you can see the locations where the screws reside that you need to remove. I have attached a…

Thanks for the photo and it does show the left side, which is the idler head side. I can verify for you that the you do have the correct replacement cover: - Replacement Cover for Solera Awnings - Idler Head - Front Cover - Black #LC643923 This will…

Thank you for the photos! It looks like you have the Regal Style awning head so for a replacement front cover you need part #LC643923 for the idler side. If there is a clip missing on the back cover then I recommend replacing that as well so the…

The correct rear cover for your front Replacement Cover for Solera Awnings #LC643923, is the Replacement Cover for Solera Awnings #LC643921.

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…