bing tracking image
Q & A Icon

Will Fulton Plastic Trailer Fenders # F008575-2 Fit an 18 Foot Boat Trailer with 15 Inch Wheels


Im not sure my measurements match closely enough with dimensions on your Web page. Old fender measurements inside wheel well are 9inch wide, 28inch long, 9-1/2 inches deep. Overall dimensions: 10-1/2 inch wide, 43inch long, 12inch tall. Top step: 6-1/4inch wide. Front, rear steps: 9-1/2inch wide. Mounting brackets: 30 inches apart inside to inside bolt holes are 2-3/4inch and 6-1/4 inch from trailer frame. Wheel size: 15inch 25inch with inflated tire.


Expert Reply:

Based on the measurements you have provided it sounds as if the Fulton plastic fenders, # F008575-2, are slightly larger than your existing fenders. Larger is fine, but if they were too small that is when you run into problems. Given that you have 15 inch wheels these fenders should fit well because they are designed for 15 inch wheels.

The only thing that you may have to move or modify would be the existing mounting brackets on the trailer. This is because there is not standard measurement or type of mounting bracket for trailer fenders.

expert reply by:

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Similar Expert Q&A Pages