Weight Distribution Hitch With Sway Control for 1,400 lb Tongue Weight
Question:
I currently have a e2 10,000 pound with a 1,000 pound tongue max hitch. Recently i purchased a golf cart to haul in the bed of my truck. Total weight without the cart on the tongue is 1,100 pounds and with the cart is 1,473 tongue weight. I am fine with payload numbers and axle ratings. My question is, if i add air bags will it take the stress off the bars thus eating up the cart weight or do i have to upgrade to a heavier weight distribution system?
asked by: Rod
Helpful Expert Reply:
Adding air bags won't remove tongue weight or stress from the weight distribution system, and since there are no bars rated for nearly 1,500 lbs of tongue weight from Fastway, it does mean you need to upgrade to a more robust weight distribution system.
For approximately 1,500 lbs of tongue weight, if you liked your Fastway system you can get one from the same manufacturer, Equal-i-zer. This system is like the Fastway but with 4 points of sway control - at the hitch head and spring bars - instead of 2 points for even better control. The correct Equal-i-zer for 1,500 lbs of tongue weight is the following:
- Equal-i-zer Weight Distribution System with 4-Point Sway Control # EQ64FR
This system fits a 2-1/2 inch hitch and is for tongue weight capacities of 1,200 lbs - 1,600 lbs so it is perfect for your application. It also comes with the 2-5/16 inch hitch ball so you don't have to make that purchase separately.
If your truck has a 2 inch hitch, I confirmed with the manufacturer that you can use this system, you just need a different shank, the Reese Weight Distribution Shank # RP54998.
This shank has a 16,000 lb towing/1,600 lb tongue weight capacity and will give you up to a 8-5/8" rise or 2" drop.

Products Referenced in This Question
Reese Weight Distribution Shank - 16,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 7 Inch Rise
- Trunnion - 8 Inch Rise
- Reese
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 16,000 lbs GTW, 1,600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1400 lbs
- 1500 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 16,000 lbs GTW, 1,600 lbs TW
- Q&A: Recommended Weight Distribution System for 2-1/2 Hitch Towing 12K Trailer
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Tonneau Cover
- Shop: TruXedo TruXport Soft, Roll-Up Tonneau Cover
- Shop: Truck Bed Mat
- Search Results: truck bed mat
- Q&A: Does the # EQ64FR Come with the Hitch Ball Included?
- Q&A: Is There a Weight Distribution System with Solid 2.5" Shank
- Q&A: Recommended Weight Distribution System for a Jayco Eagle HT 284bhok
- Q&A: Weight Distribution Recommendation for Reflection 315RLTS Travel Trailer
- Shop: BedTred Impact Truck Bed Mat - Trucks w/ Bare Beds or Spray-In Liners - Thermoplastic
- Shop: Westin Custom Fit Truck Bed Mat - Rubber - Black
- Shop: Blue Ox 2-Point Weight Distribution w/ Sway Control - 6-Hole Shank - 12K GTW, 1.2K TW
- Search Results: tonneau covers
- Shop: Suspension Enhancement
- Search Results: eq70~00~4800
- Q&A: Can a Lubricant be Used With an Equalizer Weight Distribution Hitch?
- Shop: TruXedo TruXport Soft, Roll-Up Tonneau Cover
- Q&A: Maximum Distance For Mounting Sway Bracket For Equal-i-zer Weight Distribution System
- Shop: RV Camera
- Search Results: rv back up camera
- Search Results: rear view safety
- Search Results: blue ox bars
- Search Results: equalizer spring bars