How to Wire the Optronics Driving Light Kit # QH-87CD


Wireing to parts and switch

Expert Reply:

The Optronics Driving Light Kit, # QH-87CD, will come with a total of 7 wires, the lights and a switch. Of the 7 wires, you will have 3 black ground wires, 2 white extension wires, 1 white main power wire and 1 red power supply wire.

Each light will have 2 wires, 1 for ground and 1 for power. The ground wire from each light will be connected to a black ground wire to a clean, bare metal surface using a provided sheet metal screw and the white extension wire will attach to the white main power wire running to the middle, or number 2, terminal of the switch.

There are 3 spade connectors on the switch. As I stated, the middle terminal is for the white power wire from the lights. The first terminal is for the ground wire, which will then need to be mounted to a clean, bare metal surface. The third terminal is for the red power supply wire, which will run to the positive side of the vehicle fuse box or battery terminal.

I have attached a diagram for the wiring set up for these lights.

Click to Enlarge
expert reply by:
John H

Ask The Experts a Question >>

Product Page this Question was Asked From