Ramp Spring and Hinge for Use with 150 lb Shed Door that is 6 Feet Wide
Question:
I was wondering if this would be a good choice for a shed door that I want to fold down and also be used as a ramp for the shed. The door would be made from 2x4s and 5/8 plywood and probably weigh a little more than 150lbs. The door is 6foot wide and just under 7foot tall. What would you suggest for a hinge. I was thinking about using 362trcph2, the 2inch wide 6foot continuous aluminum hinge. Thanks
asked by: Brian G
0
Expert Reply:
The ramp door spring part # 362SA7 would do a great job making the door you mentioned easier to raise and lower. Then for a hinge the part # 362TRCPH2 would also be a great option as well. This is the exact size you'd need and is a very durable and sturdy design.
expert reply by: Jameson C
0
Product Page this Question was Asked From
Conventional Ramp Door Spring for 7' Wide Enclosed Trailer - Single Spring - 150-lb Capacity
- Trailer Ramp Springs
- Single Ramp Spring
- Conventional
- 150 lb Capacity
- 79 Inch Wide Spring
- 79 Inch Wide Doors
- 4-7/8 Inch Tall Spring
- Steel
- TRC
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Dimensions Of The Conventional Ramp Door Spring for 7' Wide Enclosed Trailer 362SA7
- Trailer Ramp Spring Recommendation for 63-1/2 inch Wide Ramp
- Does Conventional Ramp Door Spring # 362SA7 Come with Rods for Winding Spring
- Replacement Cable for an Enclosed Trailer Ramp Door Spring
- Ramp Spring Recommendation for 72 inch Wide Door that Weighs 160 lbs
- Trailer Ramp Spring Assist Recommendation for a 44 inch Wide Trailer Ramp
- Trailer Ramp Spring for a 5x8 Enclosed Trailer 72 Inches Wide Inside