Will Trailer Hub # AKIHUB-545-35-K Fit in Place of TDE Hub 11033
Question:
I need to replace a TDE 11033 hub. Your AKIHUB-545-35-K is almost the same except that my TDE hub doesnt have the raised extension on the lug side of the hub. A photo of the TDE hub is attached FYI. The hub goes into a Kodiak Rotor-10 that has a 3inch ID hole that your hub would have to press in to. Its also going onto a TDE axle torsion spindle #84 if that helps. Is it compatible/Will it fit?
asked by: Jim L
0
Expert Reply:
Based on the spindle your trailer has the hub part # AKIHUB-545-35-K is going to fit on it despite it having what looks like a different design overall.
expert reply by: Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Similar Expert Q&A Pages
- Correct Hubs for Boat Trailer with L68149 and L44649 Bearings
- Availability of Dexter 3,500 lb Trailer Axle Hub that is Pre Greased Jamseson, you recommended
- Correct 5-Lug Hub for Square #84 Spindle TRU47FR
- Replacement Trailer Hubs Using L68149 and L44649 Bearings
- Replacement Bearing Kit For a 2004 Karavan Marine Trailer With Hub H-1377
- Replacement Trailer Hub that is Pre-Greased for 3,500 lb Trailer Axle
- Replacement Idler Hub for Boat Trailer With 3500 lb Axle
- What Grease To Add to Pre-Greased Trailer Idler Hub Assembly for 3,500-lb Axles
- Replacement Recommendation for TDE 46210 Hub
- Hub that Fits Trailer Axle with Bearing Dimensions of 1.25 and 1.75 inch
- Idler Hubs to Replace Hub/Drums on 5200 lb Capacity Axle
- How to Find Idler Hub to Replace Hub/Rotor of Disc Brake System on Boat Trailer
- Availability of Pre-Assembled and Pre-Greased 3,500 lb Trailer Axle Hub
- Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
- Difference Between EZ Lube Compatible Hubs and Regular Hubs
- Distance From End of TruRyde #84 Spindle Stub to the Back of an Installed Hub
- How to Determine Max Wheel Diameter for an Idler Hub
- How to Choose Replacement Hub for Hub Part 46210
- How to Pick Out Boat Trailer Hub for TrailStar Boat Trailer
- How to Determine Compatible Replacement Trailer Hubs
- Trailer Hubs Based on Spindle Measurements 3,500 Pound Axles
- Will etrailer.com Hub AKIHUB-545-35-K fit Trailer Hub with Bearing Spindle Diameter 1.06 and 1.375
- Trailer Idler Hub with 5 on 4-1/2 Bolt Pattern that Fits a 1 Inch Diameter Straight Spindle
- Highest Weight Rated Trailer Hubs that have Bolt Pattern of 5 on 4-1/2 inches
- Diameter of Center Section of Hub # AKIHUB-545-35-K
- Lug Nut Torque Recommendation for 3,500 Pound Hubs and 15 Inch Steel Wheel
- Axle Replacement For Older Axle That Uses Obsolete LM67048 Inner and Outer Bearing Combination
- How To Troubleshoot A Trailer Hub Overheating