Are Mounting Brackets for Curt RV Trailer Hitches Available Separately

Question

Question:

Can I purchase just the mounting brackets? I purchased the 13703 kit from etrailer and the brackets defiantly wont work on my rv.

asked by: Jason B

0

Expert Reply:

I reached out to Curt and the mounting brackets for the Adjustable Width Trailer Hitch Receivers # 13703 and # C13704 aren't available as replacement parts so if the brackets on your current hitch doesn't work then you'll need to get a whole replacement hitch instead.

expert reply by: Jon G

0

Answer 1

There are a number of bike racks that have been rated for use on the back of 5th wheels and motor homes. I recommend going with the Yakima LongHaul 4 Bike RV Rack #Y02476 which works on 2" hitches. With the Yakima, you get a high quality product…

view full answer...

Answer 2

I went out to the warehouse and measured Curt trailer hitch #C13704 for you. The distance from the top of the mounting flanges to the top of the cross tube is 2 inches. I have included some pictures with additional measurements for you.

view full answer...

Answer 3

You can absolutely install a trailer hitch onto the back of a travel trailer. We actually have a nice selection of trailer hitches that are designed for this very purpose. I do just recommend contacting the trailer manufacturer to make sure the frame…

view full answer...

Answer 4

I may have a solution for you, but there are not any front hitches available for a 2001 or 2002 Ford F-53 chassis so this type of thing would need to be fabricated especially for this chassis. You might be able to take something like the #C13704 and…

view full answer...

Answer 5

For your 2012 Jayco Jay Flight 26RLS Trailer the Curt Adjustable Width Trailer Hitch #C13704 will work really nicely. This particular Class III hitch is designed specifically for applications like this, as it can be bolted directly to the frame rails…

view full answer...

Answer 6

The cross tube on the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704 is 68.5 inches from tip to tip without the hanging brackets. It has a max weight capacity of 5000 pounds and a max tongue weight of 500 pounds.…

view full answer...

Answer 7

For your Forest River No Boundries 19.3 NoBo, I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704. This hitch receiver is rated for tongue weights up to 500 lbs. I can't confirm your bike rack is…

view full answer...

Answer 8

If your camper has a frame width between 22 and 66 inches the Curt #C13704 would potentially work as it can bolt on and has a 500 lb tongue weight capacity.

view full answer...

Answer 9

The length of the mounting brackets for the Curt Trailer Hitch Receiver #14053 is 15-1/8" as you can see from the attached photo. Since the frame is extended past the regular body length it could very well affect the towing capacity of your…

view full answer...

Answer 10

I attached two picture for the Curt hitch part #C13704 that have all of the dimensions on it. I believe you also asked for the distance from the crosstube to the front of the mounting bracket. Which if so, that distance is 2 inches. The third picture…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Are Mounting Brackets for Curt RV Trailer Hitches Available Separately

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching