bing tracking image
Q & A Icon

What Bearings and Seals do I Need for my Al-KO T-44 Axle  

Question:

I have a travel trailer with Al-co T44 4400# axels. I am looking for the correct bearings/seals. Breaks are 10x2 1/4 m Thanks

0

Expert Reply:

Based on my research, the AL-KO T-44 axle spindle on your trailer uses the # L68149 inner bearing and # LM67048 outer bearing. I recommend verifying this on your trailer by simply pulling the hubs and checking for the numbers that should be stamped onto the bearings themselves. For the seal I have found typically the Grease Seal part # # RG06-050 is what you need. It has an inside Diameter of 1.719" and an outside diameter of 2.565" This can be verified by checking when you pull the hubs to confirm the bearing numbers.

If this is the case then the above parts are going to be exactly what you need to replace your current bearings and seals.

This is the best time to also switch out the brakes if they have been covered in any grease or to refresh them. To do this use the Electric Trailer Brake Kit - Self-Adjusting - 10" part # AKEBRK-35-SA these will give you brand new assemblies rather than trying to replace components as they fail.

I have added the videos I have done showing how they come apart and how the brake replacement goes.

expert reply by:
0
Randy B

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>