Having Difficulty Pairing Camera and Monitor of Voyager WVOS541 WiSight Observation Camera System

Question:

Blue Screen still says to pair it after going through the pairing steps

0

Expert Reply:

I explained the difficulty you're having with my contact at ASA Electronics, and he was familiar with the issue. The vast majority of the time this occurs, it's because the camera is powered up too soon.

Let me try to make this a little clearer for you. The camera gets its voltage from the trailer running lights but in order to successfully pair, the running lights need to be OFF at the beginning of the process. Connect the monitor to 12-V power, then press the SELECT/PAIR button and select the AV source. Press and hold the SELECT/PAIR button for 5 seconds and release, at which time the monitor will display 'PAIRING START'. At that point, power up the camera by turning on the running lights, and the camera should pair up correctly. If the monitor displays 'SAVE DATA', you'll know it worked correctly.

I've linked to a product description video featuring the camera system.

expert reply by:
0
Mike L

Product Page this Question was Asked From


Follow up Questions

Similar Expert Q&A Pages

See More Q&A Expert Answers >>