bing tracking image
Q & A Icon

Replacement Scissor Jack for a 2008 KZ Coyote Lite CL168

Question:

What replacement scissor jack do i need for my 2008 KZ Coyote Lite CL168

0

Expert Reply:

We have exactly what you need. I was able to confirm that your Gross Vehicle Weight Rating for your 2008 KZ Coyote Lite CL168 is 4000lbs. With that said using 4 of Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs gives you a total weight rating of 10,000 lbs which is more than enough to handle the job. The Etrailer Scissor Stabilizer Jack - 18-3/4" Travel Part # TJSC-24 is the way to go as long as the frame of your camper is not more than 23 3/4 inches form the ground. These are designed to attach directly to your camper's frame and in my experience most of the time will even line up with the holes already there. I've ran into a few exceptions to this but not very often. I have included a video I did on these for you to check out with some additional specs if you want them.

If your camper's frame is higher than that I recommend the Etrailer Leveling Scissor Jack - 24" Lift - 5,000 lbs Part # JSC-24-IND. These would be almost overkill in your situation giving a total capacity of 20,000 lbs. with 4 installed but occasionally the frame height is too high for the other option. These are designed to work with trailer frames up to 29" off of the ground. Typically for larger or off road campers but there is always the exception. I've included my video on this one as well if you need it. Happy Camping!

expert reply by:
0

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>