Will 2-Speed Boat Trailer Winch with 20' Strap # 315-W2500D Fit Load Rite Boat Trailer

Question

Question:

will this bolt on my 18 foot load rite trailer with rollers ? Boat dry weight is only 1300 lbs and has a 90 horse outboard . My trailer is 18 years old and the winch is to hard me to crank

asked by: Austin B

0

Expert Reply:

The 2-Speed Boat Trailer Winch with 20' Strap # 315-W2500D that you referenced is designed to fit the standard winch mounting brackets like what your trailer would have so it will work great for that. It also has plenty more capacity than your boat weight calls for so it will be very easy to crank as well.

expert reply by: Jameson C

0

Answer 1

I've linked some photos and diagrams with the dimensions of the 2-Speed Boat Trailer Winch with 20' Strap - 2,500 lbs #315-W2500D for you, but the plate is overall 7-1/8" x 5-3/4".

view full answer...

Answer 2

The 2-Speed Boat Trailer Winch part #315-W3200D is an excellent upgraded 3,200 lb winch for a boat trailer. In regards to mounting, not all winches use the same pattern so you'd need to compare the dimensions in the photo below to what you have…

view full answer...

Answer 3

The base of the Fulton High-Performance 2-Speed Trailer Winch, Item #F142416, is 5-3/4 inches wide by 6-7/8 inches long. I have attached a link to a review video that has more information for you to check out.

view full answer...

Answer 4

The overall length of the Fulton High-Performance 2-Speed Trailer Winch with 20' Strap - Zinc - 2,600 lbs #F142416 is 9-3/8" including the spool.

view full answer...

Answer 5

Essentially to calculate mechanical advantage, first take the output force and then divide it by the input force. Input force is how much force you apply to the handle. Output force is how much force is applied to the load. Some of the winches are…

view full answer...

Answer 6

The base on 2-Speed Boat Trailer Winch #315-W2500D measures 5-3/4 inches wide by 7-1/8 inches long. This is a very standard size and bolt pattern so it should fit on your trailer easily. I attached a review video for this for you to check out as…

view full answer...

Answer 7

First let's talk about capacity since you think you were overloading your Fulton XLT 1801. The reason it says max line pull is 1800 lbs first layer and 800 lbs with a full drum is that for every layer of rope wrapped around the drum the capacity…

view full answer...

Answer 8

I went out into our warehouse to grab a Dutton Lainson Winch part #DL14627 to measure the bolt hole dimensions for you. I attached a picture that has all of them listed.

view full answer...

Answer 9

I believe you are asking how to remove the shower door part #PF267001 from the shower box without damaging the frame of the shower box. There should be a pin with a spring on either side of the door. If you can compress those pins in the door, you…

view full answer...

Answer 10

We don't carry the Knot Autoflex couplers, but we do have a solution that could work for you. You could assemble a solution of parts we offer that would consist of: • JIF Marine 2500 lb 2-speed hand winch, part #315-W2500D • Winch Stand, part…

view full answer...

Answer 11

You can use pulley block #BDW20004 for your winching needs but it is rated at 4,000 pounds so if at any time the full weight of the boat is on the block it would exceed the capacity. For a higher capacity option I recommend #CU881081 which is rated…

view full answer...

Answer 12

The Valley/Husky 7054 5th wheel trailer hitch fits in industry standard above the bed rails. For a kit that fits both the hitch and your 2001 Chevy Silverado 3500 I recommend Reese custom kit #RP50064-58. This custom kit minimizes the amount of…

view full answer...

Will 2-Speed Boat Trailer Winch with 20' Strap # 315-W2500D Fit Load Rite Boat Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching