Replacement Rear Head Cover for Regal Style Solera Awning  

Hey Jim! The Replacement Back Cover for Solera Power Awnings - Drive Head or Idler Head - Regal Style - Black #LC643921 is a pretty simple installation that just requires you to remove the mounting screws, remove the cover, and then reverse the order…

Thanks for the information. I checked with Lippert and didn't get anything back on the first two numbers and the last one is a fire safety code. The good thing is there aren't many options for replacement motor covers for Solera awnings. I…

To replace the screws on the Front Cover for Solera Power RV Awnings item #LC643922 you will want the Replacement Solera Manual Awning Head Cover Fastener item #LC266156. These are #6 pan head screws that are a 1/2" in diameter. We do not carry…

For your Solera Awning, you can use the Replacement Cover for Solera Awnings #LC643923 for the front, and the Replacement Cover for Solera Awning #LC643921 for the back. I have included a couple of videos for you to check out as well.

To remove the front cover #LC643923 from your Solera Awning there are indeed 2 screws that need to be removed. If you look at the back f the idler head unit you can see the locations where the screws reside that you need to remove. I have attached a…

The correct screws for the Solera Awning Plain Drive Head #LC289561, are #6-15 UNF x 1/2”.

An E1 error code on your Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU #FR93FR means that it tried to ignite twice but didn't have the correct amount of gas pressure. First check to make sure your gas valves are fully…

Meg, for your Lippert Solera 2000 series awning you can use the Replacement Front Cover for Lippert Edge Awnings #LC32NJ for the front and #LC43UD for the rear to replace your damaged cover. Also, if by cap you're meaning the manual override…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Thank you for the photos! It looks like you have the Regal Style awning head so for a replacement front cover you need part #LC643923 for the idler side. If there is a clip missing on the back cover then I recommend replacing that as well so the…