What are the Base Dimensions of Jif Marine 2-Speed Boat Trailer Winch # 315-W2500D

Question

Question:

Base dimensions of the winch

asked by: Paul

0

Expert Reply:

The base on 2-Speed Boat Trailer Winch # 315-W2500D measures 5-3/4 inches wide by 7-1/8 inches long. I have included a picture showing this for you and a link to a video review on this winch.

expert reply by: Michael H

0

click to enlarge

Answer 1

The 2-Speed Boat Trailer Winch part #315-W3200D is an excellent upgraded 3,200 lb winch for a boat trailer. In regards to mounting, not all winches use the same pattern so you'd need to compare the dimensions in the photo below to what you have…

view full answer...

Answer 2

The bolt hole dimensions on the bottom of the Jif Marine Single-Speed Boat Trailer Winch with 20' Strap and Brake item #315-W2000D are 2.5 inches apart center to center. The attachment point to the center bolt is a slot that is 3.5 inches - 5…

view full answer...

Answer 3

I went out to our warehouse and measured the Single-Speed Boat Trailer Winch part #315-W2000D for you. The dimensions of the base are as follows; 6-1/4" long x 3-3/4" wide.

view full answer...

Answer 4

I pulled one of the Dutton-Lainson Hand Winches, part #Dl15440 from our warehouse and took the measurements you asked about. I have also attached a photo of the winch with the dimensions you can check out. This is a 3,200 lb 2-speed direct drive…

view full answer...

Answer 5

I've attached two pictures of the bolt pattern of the Fulton Winch #F142401. One shows the size of each bolt hole and the other shows the distance between the holes.

view full answer...

Answer 6

Although the #348776 you'd looked at would do the job, going with a winch that has a higher capacity than what you actually need is a good idea. The winch won't need to work as hard. With this in mind, I'd recommend the #315-W2000D from…

view full answer...

Answer 7

The 2-Speed Boat Trailer Winch part #315-W3200D would be an excellent option to replace a Valley Industries 2-Speed 2,800 lb Winch. It will hold a slightly higher weight capacity at 3,200 lbs and retains the two speed operation. It also comes with an…

view full answer...

Answer 8

I have a solution for you. The Fulton Single Speed Trailer Winch - 10" Long Handle, w/ 20 FT Strap - 1,800 lbs, #F142306, is the winch I recommend for your application. This winch uses a 2-way ratchet system and has a solid drum design which is…

view full answer...

Answer 9

Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with…

view full answer...

Answer 10

Yes. The Jif Marine 2 Speed Trailer Winch # will work as a replacement for your old Fulton T3205 winch. It has the exact same 5.1:1 and 12.2:1 gear ratios as the T3205 and also comes with a 10" handle. I've attached a picture for reference…

view full answer...

Answer 11

I attached a picture that shows the dimensions of the JIF winch #315-W2500D as well as another picture that shows the overall dimensions of the jack.

view full answer...

Answer 12

For the type of application you described I recommend going with a highly-rated brake winch that's designed more for vertical lifting such as the excellent Dutton-Lainson #DL15761. This particular winch features a 2,500 pound weight capacity and…

view full answer...

What are the Base Dimensions of Jif Marine 2-Speed Boat Trailer Winch # 315-W2500D

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching