Will the Trailer Hub/Drum Part # AKHD-655-6-G-EZ-K Work with Trailer Brake Kit Part # AKEBRK-7-SA
Question:
AKHD-655-6-EZ-K and AKEBRK-7-SA will these two parts work together?
asked by: Andrew
0
Expert Reply:
Yes, the Trailer Hub and Drum Assembly part # AKHD-655-6-G-EZ-K will work with the Electric Trailer Brake Kit part # AKEBRK-7-SA. The braking assembly uses a 5 bolt brake flange mounting pattern and is compatible with 14-1/2" to 16-1/2" diameter wheels. The hub assembly has a 6 on 5-1/2" bolt pattern and uses an 25580 inner and 15123 outer bearing. As long as all of the above information is inline with your axle/wheels then this setup will work nicely for you.
expert reply by:
Conner L
0
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 6K Axles - 12" - 6 on 5-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 6K Axles - 12" - 6 on 5-1/2 - Galvanized
- Search Results: akhd~655~6~ez~k
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-6-G-EZ-K Review
- Q&A: Do Trailer Drums have to be Turned when Replacing Electric Trailer Brake Assemblies
- Shop: Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: akhd~655~6~g~ez~k
- Shop: Electric Trailer Brake Assembly - Dacromet - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Shop: Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Search Results: 12x2 brake shoes
- Search Results: 12x2 brake drums 7000 dexter
- Search Results: akebrk~7
- Search Results: akebrk~7~sa
- Search Results: akebrk~7l~sa
- Q&A: Galvanized 6 Lug Trailer Hub For a Spindle With 2.125 Grease Seal and 1.75/1.25 Bearing Sizes
- Q&A: Replacement Brakes System to Upgrade 2006 Sea Doo Boat Trailer
- Q&A: Replacement Hubs for Old 3 Inch Axle With 25580 and LM67048 Bearings
- Q&A: Does AKHD-655-6-EZ-K Pre-Lubed 3500 lb Hub Drum Need Additional Grease Before Installation
- Q&A: What is the Physical Difference of a 5,200 lbs Axle and a 6,000 lbs Axle?
- Q&A: Correct Trailer Hub and Drum Assembly for 1994 Four Winns Boat Trailer with 4,740 Lb GAWR