Tools Required To Install Reese Strait-Line Weight Distribution System # RP66084

Question:

What tools, mainly sockets, do i need to install this system

0

Expert Reply:

The Reese Strait-Line Weight Distribution System w Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW # RP66084 will require limited tools for installation. You will need
3/4 inch socket, a 1/2 inch socket, and matching open end wrenches. You will also need a torque wrench like # ALL944001. You will also need two drill bits: 7/16 inch and 17/32 inch. The manufacturer also recommends an 8-10 inch c-clamp, tape measure, and penetrating oil like # L10444.

expert reply by:
0
Jason S

Ask The Experts a Question >>


Products Referenced in This Question



Product Page this Question was Asked From


Similar Expert Q&A Pages

See More Q&A Expert Answers >>