Question:
We are looking to purchase the Shank and ball assembly for the following hitch. Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW We have the bars and brackets. Is this available or will we need to buy the complete kit?
asked by: Doug M
Expert Reply:
For your Equal-i-zer Weight Distribution System # EQ37100ET, you can use the Equal-i-zer Weight Distribution Shank # EQ90-02-4100, which has a maximum rise of 7 inches and a maximum drop of 3 inches. For the system head, you will use the Equal-i-zer Replacement Head # EQ90-02-1000. This is designed specifically for the 1,000 pound tongue weight system you have and for the compatible 2-5/16 inch hitch ball you will use # EQ91-00-6100.
I have attached a few short video demonstrations on these products that you can also check out.
Replacement Head for Equal-i-zer Weight Distribution Systems - 1,000 lbs TW
Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems - 10,000 lbs
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
